Exhausts for the Ferrari 248 F1 in 1:20 scale are a Hobby Design accessory that on a model of the Formula car replaces the tips of the exhaust system emerging from the engine cover.
Responsibility details are not available.
An accessory for builders of Formula 1 cars from the Hobby Design brand. It is not a kit of a single-seater but a replacement for the exhaust tips, that is for the part that on Formula models projects from the sidepod or the engine cover and tends to be very much in view. Injection-molded replacements tend to have a thick wall and a blanked mouth, whereas a separately made part has a thin wall and a genuinely open hole.
The Ferrari 248 F1 is the single-seater of the 2006 season. The designation refers to the power unit of the time, that is an eight-cylinder with a displacement of 2.4 liters, with which the ten-cylinders used until then were replaced in Formula 1. The car started in the last year of the shared era of Michael Schumacher with Scuderia Ferrari. The ban on the older engines also meant a different run of the exhaust tract, so the shape and the position of the tips are characteristic of this year.
Around an exhaust it makes sense to work with heat discoloration. Start from a metal base and add brownish and blue-gray shades in faint breaths toward the mouth, so that the transition comes across as smooth. Do not use a heavy coat here, otherwise the drawing of the surface is lost. Check the placement of the tips dry before gluing, because on single-seaters a deviation of a few tenths of a millimeter is noticed at once by the asymmetry.
The item is an accessory for a build; it does not hold the single-seater itself.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!