Hyperlock HLO6S rims in 1:24 scale scale down an aftermarket wheel of 19 inches for builds of road and modified cars.
Responsibility details are not available.
The set stands for an aftermarket wheel of the kind put on real cars in place of the production one. The name gives the size in inches as 19 and the type designation of the rim, so it is clear what style of build it is meant to support. It is not a model of a car; it is a partial accessory for a build in 1:24 scale.
Rims with this kind of shaping belong to the modern current of modifications, which bets on a large diameter, thin spokes and a raised edge of the rim. Under them the brake system stands out, which matters on builds with an exposed chassis. That is exactly why such a wheel is often combined with a lowered ride height and low-profile rubber. A large rim moreover visually reduces the height of the sidewall, so a build comes across as lower even though you have not touched the suspension.
It looks best when the face of the rim is smooth, so a filler primer and a light polish come before the silver or dark shade. The spokes can be brought out with a dark shade drawn into the recesses and wiped off the flat areas. Seat the wheel on the axle so that it stands square; even a small inaccuracy during curing gives a tilted wheel away. Leave enough time between the individual coats of paint for drying.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
