A 1:24 carbon decor for the Subaru BRZ and the Toyota GR86 from the Japanese brand Studio27 is a sheet of decals imitating carbon weave, intended to bring the exterior and interior parts of a model to life. It is not a kit but an accessory.
Responsibility details are not available.
A sheet of water-slide decals in 1:24 scale that carry neither lettering nor sponsor logos but imitate the structure of woven carbon composite. They serve to make parts of a model, such as the hood, the diffuser, the spoiler, the mirrors or interior elements, look as if they were carbon, without your having to paint them laboriously. It is not a kit: the model of the car itself, paints and varnish are not included in the package. The set is prepared for the body of the second generation of the Subaru BRZ coupe, or of its sister car the Toyota GR86.
The second generation Subaru BRZ and Toyota GR86 are two versions of a jointly developed light coupe with a flat four-cylinder boxer engine, rear-wheel drive and a low center of gravity. The cars share the body and the engineering and differ above all in the tuning of the suspension and in the details of the front end. That is exactly why accessories for both designations are made together. Carbon parts are a typical element of optional and racing modifications on these cars, so a decor imitating the weave matches the real practice of owners and of builders of racing specifications.
A carbon decor is a continuous area, so work with it differently from ordinary lettering. The base has to be smooth and glossy, ideally black or dark gray, so that any show-through does not spoil the impression of the weave. Cut the sheet into smaller pieces according to the shape of the part, preferably into several small ones rather than one large one; on curved surfaces a continuous film will otherwise wrinkle and a crease will appear that you will not put right. Before applying, offer each piece up dry and check the direction of the weave, as on adjoining surfaces the pattern should continue. Soak the decal in lukewarm water, settle it on a drop of water, press the excess out with a soft brush from the center outward, and over edges and recesses use a decal softener, which draws the film into shape. Careful warming with a hairdryer helps the decor to settle onto a more pronounced curve. Once it is perfectly dry, spray the area with a gloss clear varnish, as only that gives the carbon depth and hides the edges.
This is a standalone sheet of decorative decals, not a kit. The model of the car, paints, varnish and a decal softener are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!