LAST CHANCE! 20% OFF Ends Tonight!

1:32 A-1 Skyraider Yankee extractor system

A-1 Skyraider, the Yankee escape system, 1:32 is a Quickboost resin accessory for kits of the ground-attack aircraft. It is not an airplane model but a detail to be fitted.

Scale1:32
Manufacturer Aires/Quickboost
Product EAN8591111000000

Responsibility details are not available.

6.36 € 5.09 €
4.20 € without VAT
−20 % You save 1.27 €
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A-1 Skyraider, the resin Yankee escape system, 1:32

A resin accessory of the Quickboost brand, an accessory range of the Czech manufacturer Aires, intended for kits of the Douglas A-1 Skyraider ground-attack aircraft in 1:32 scale. This is not an airplane kit but a detail part that is fitted into a separately sold plastic model. For airplanes the 1:32 scale is a large one and every simplified detail in the cockpit is clearly noticeable on a finished model; it is exactly there that this kind of accessory makes the most sense. The exact number of parts is not stated here.

What the set is for

The Yankee system was an emergency escape system with which machines originally without an ejection seat were retrofitted in later service. A rocket joined to a harness pulled the pilot out of the cockpit, so the assembly looks different from a conventional ejection seat and is conspicuous above all in the arrangement above the seat and around it. A resin casting captures the shape of the assembly and its details substantially more faithfully than a simplified plastic part does.

Usage tips

Wash the parts in lukewarm water with dish soap, so that no mold release agent stays on the surface. Cut the casting block off with a fine-toothed saw and sand the remainder wet with your airways protected. It is glued with super glue; on small parts the gel variant and application with a toothpick prove their worth. Paint the part away from the model: a primer coat, the shade of the interior, a dark wash into the recesses, a dry brush on the edges. Pick out the straps and the colored warning elements with a fine brush only at the end. Try the seating dry before gluing.

Who the set is for

  • Modelers building the Skyraider in 1:32 scale
  • Builders who display a model with an open cockpit
  • Anyone interested in a faithful rendering of the later equipment of the airplane
  • Modelers with basic experience of resin

This is not a model kit. The set is intended to complete a separately sold plastic kit; the base model, glue and paints are not part of the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

An emergency escape system with which machines without a conventional ejection seat were retrofitted. A rocket joined to a harness pulled the pilot out of the cockpit, so the assembly looks different from an ordinary ejection seat.

It is not. It is a resin detail part meant to be fitted into a separately sold plastic kit of the Skyraider in 1:32 scale.

The particular target kit is not stated here. Before buying we recommend comparing the dimensions and the shape with the model you are building.

Use gel super glue applied with a toothpick and try the part dry first. Lay down a primer before painting.

Last seen

1:32 A-1 Skyraider Yankee extractor system
-20 %
Favorite
Aires/QuickboostQB322811:32

1:32 A-1 Skyraider Yankee extractor system

A-1 Skyraider, the Yankee escape system, 1:32 is a Quickboost resin accessory for kits of the ground-attack aircraft. It is not an airplane model but a detail to be fitted.
In stock
6.36 €5.09 € You save 1.27 €
1:35 Sd.Kfz.164 Nashorn-25 %Stock ClearanceFavorite
EduardED365061:35

1:35 Sd.Kfz.164 Nashorn

A photo-etched detail set Sd.Kfz.164 Nashorn in 1:35 scale from the Czech manufacturer Eduard. It is not a model of the vehicle, but an accessory for a plastic kit.
2 left
21.40 €16.04 € You save 5.36 €
ItaleriIT64641:35

1:35 Breda 20/65 Mod. 35 with crew

Injection-molded plastic kit of the Breda 20/65 Mod.35 with crew in 1:35 scale from Italeri: the Italian anti-aircraft and anti-personnel gun with crew figures.
In stock
18.76 €
MontexMXSM483311:48

1:48 F-22 RAPTOR

A masking set for the American F-22 Raptor fighter in 1:48 scale. It covers the cockpit canopy from the outer and the inner side and is die-cut for the kit from Hasegawa.
In stock
4.76 €
ItaleriIT51213

Brush Synthetic Round (10)

Italeri Synthetic Round Brush No. 10 is a larger round brush with synthetic fibers for laying paint on surfaces and for base coats on a model.
In stock
3.56 €
Green Stuff WorldGSW74231:48

1:48 Dungeon Silicone mould

The Dungeon Silicone Mold 1:48 is a flexible silicone mold with the pattern of the stone floor and walls of an underground dungeon, from which you cast terrain pieces of your own.
In stock
23.96 €
1:48 GBU-54 Thermally Protected-25 %Stock ClearanceFavorite
EduardED6485981:48

1:48 GBU-54 Thermally Protected

1:48 GBU-54 Thermally Protected is a resin set of a guided bomb in the thermally protected version, intended as underwing armament for aircraft models in 1:48 scale.
Last one!of 2
10.40 €7.80 € You save 2.60 €
New WareNWAM00941:32

1:32 Me 262 B-1/U-1 BASIC masks

New Ware Me 262 B-1/U-1 BASIC 1:32 are accurate self-adhesive painting masks of thin washi (kabuki) tape for clean masking of the canopy glazing, the wheels and further areas when airbrushing.
In stock
7.56 €
1:48 MiG-21 kola
-20 %
Favorite
EduardED6480261:48

1:48 MiG-21 kola

A resin MiG-21 wheel set in 1:48 scale from Eduard — a detailed replacement for the landing gear wheels, not a stand-alone model.
In stock
6.80 €5.44 € You save 1.36 €
BANON DESIGNBAN013-10

BAN013 light arbor bolt 1,0mm

An arbor head with a lowered profile, 1.0 mm in diameter. It suits fender mounts and brackets, where the joint should be visible but must not overpower the shape of the part.
In stock
10.36 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.