The double-sided set 1:32 AH-1G Arctic Cobra - masks for the outer and the inner side of the glazing makes it possible to spray the frames of the cabin from both sides. The frame is then correctly visible from the interior of the helicopter too.
Responsibility details are not available.
This set contains masks for both sides of the clear part, that is, the outer and the inner one. The difference against an ordinary one-sided variant is substantial: the frame is sprayed from the outside in the airframe color and from the inside in the interior color, so when you look into the cabin it is not transparent plastic that shines out but a correctly painted structure. The extent of the set corresponds to that.
An attack helicopter has almost its whole nose glazed and the cabin is made of blocks of flat panes, into which you can see over a large part of the hemisphere. On a finished model the interior is thus far more exposed than on a fighter aircraft with a narrow canopy - an unpainted frame on the inside is visible from the usual viewing distance. With the AH-1G that goes double, because the seats of the gunner and the pilot are above and behind one another and windows light them from several sides.
The procedure has two phases. First stick the inner masks on, spray the interior shade and let it dry. Then turn the part over, stick the outer masks on and spray the airframe color. Both sets have to sit against each other, which is why the first part stuck on is the most important one - the others are aligned by it. Work in good light and check the finished part against a window to see whether the frames on both sides line up. Take the masks off only after the last sprayed coat and once the paint has gone tacky.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!