LAST CHANCE! 20% OFF Ends Tonight!
1:32 De Havilland Mosquito FB Mk.VI (for Tamiya 60326 marking LR303)

1:32 De Havilland Mosquito FB Mk.VI (for Tamiya 60326 marking LR303)

7.97 €
Add to Cart

1:32 De Havilland Mosquito FB Mk.VI (for Tamiya 60326 marking LR303)

A masking set in 1:32 scale for the de Havilland Mosquito FB Mk.VI, cut for one particular machine with the fuselage marking LR303. It is an accessory for the Tamiya 60326 kit, not a model of an aircraft.

Scale1:32
Manufacturer Omask
Product EAN8591111000045

Responsibility details are not available.

9.96 € 7.97 €
6.59 € without VAT
−20 % You save 1.99 €
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking set 1:32 - de Havilland Mosquito FB Mk.VI, machine LR303

This is an accessory for a kit, not a model of an aircraft. The set contains pre-cut self-adhesive masks for the Tamiya 60326 kit, specifically for the machine with the marking LR303. Otherwise identical sets exist for further machines of the same type, so the marking of the machine is the only thing that tells them apart; before ordering, therefore, check which scheme you want to build.

The templates are cut to shape, so the tedious cutting of strips from masking tape is no longer needed. The edges come out straight and without steps, and paint does not seep under a mask that has been pressed down well. At the large 1:32 scale it is precisely the quality of the edges that sets a carefully built model apart.

The real subject

The de Havilland Mosquito FB Mk.VI was the fighter-bomber version of the British twin-engine aircraft with a largely wooden airframe. It was powered by a pair of Rolls-Royce Merlin V-12 engines, and the crew of two sat side by side in the forward part of the fuselage. The divided cockpit glazing and the extensive areas of the fuselage are among the most laborious parts of painting this type.

Usage tips

Wash the surface in lukewarm water with detergent and let it dry out thoroughly, as a mask does not hold on greasy varnish. Transfer it with tweezers and press it down with a toothpick, especially in the corners. With masks for markings, stick them onto a surface sealed with a thin layer of gloss varnish and spray over the edge with the color of the base first; any seepage then does not show on the color of the design. Spray perpendicularly and in several light coats. Lift the mask off while the paint has only just set, in a slanting pull, and count on a single use.

Who the set is for

  • Builders of the Mosquito FB Mk.VI in 1:32 scale
  • Modelers who want to build precisely the machine with the marking LR303
  • Those who do not feel like cutting masks from tape by hand
  • Competition modelers, whose masking is judged for cleanliness

The set contains masking templates only. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masking templates for a kit in 1:32 scale that has already been bought. The model is not part of the package.

In the marking of the machine. This variant is cut for machine LR303, while other sets cover other markings of the same type.

Sprayed markings have no glossy carrier film, do not silver and make no step on the surface. With glazing, the hand cutting of frames is avoided as well.

While the paint has only just set. On fully cured paint the risk grows that the edge will tear while it is being peeled off.

Last seen

1:32 De Havilland Mosquito FB Mk.VI (for Tamiya 60326 marking LR303)
-20 %
Favorite
OmaskOMK330061:32

1:32 De Havilland Mosquito FB Mk.VI (for Tamiya 60326 marking LR303)

A masking set in 1:32 scale for the de Havilland Mosquito FB Mk.VI , cut for one particular machine with the fuselage marking LR303. It is an accessory for the Tamiya 60326 kit, not a model of an aircraft.
In stock
9.96 €7.97 € You save 1.99 €
HasegawaHA206361:24

1:24 Subaru Legacy RS '1990 Rally New Zealand'

The Subaru Legacy RS in the specification for Rally New Zealand 1990 is a plastic kit of the Group A competition car in 1:24 scale from Hasegawa.
In stock
37.96 €
KelikKS430011:43

1:43 Supermarket Parking Type 1 Base - Acrylic 3mm (180mm x 357mm) (210g)

1:43 Supermarket Parking Type 1 Base gives small collector cars a shared setting of parking bays in front of a store.
In stock
24.76 €
Kits-WorldKW321391:32

1:32 Avro Lancaster Bomber 'B' MkI - 431 Squadron 'No Not Know' KB872 SE-N.

A decal sheet for a model of the British Avro Lancaster heavy bomber in 1:32 scale, worked up for the machine with the fuselage codes SE-N.
In stock
11.96 €
HasegawaHA204271:24

1:24 Nissan Sunny Truck w/Chin Spoiler

1:24 Nissan Sunny Truck with a chin spoiler is a plastic kit of the light Japanese pickup in 1:24 scale from the maker Hasegawa.
In stock
35.96 €
ZvezdaZV36111:35

1:35 WWII Soviet Tank Hunters with Dogs. (3 x Figures, 3 x Dogs)

A set of unassembled figures in 1:35 scale: three Soviet soldiers and three dogs trained to attack armored equipment. An accessory for a diorama or for bringing a finished model of a tank to life.
In stock
11.96 €
J´s WorkPPA50471:72

Airbrush CAMO-MASK for 1/72 F-15DJ 2005 JASDF Aggressor

Js Work Airbrush CAMO-MASK F-15DJ JASDF Aggressor is a set of self-adhesive masking films for spraying the aggressor camouflage of the two-seat F-15DJ in 1:72 scale.
In stock
5.96 €
New WareNWAM03881:48

1:48 Mask Bf 109 G-6 NATIONAL INSIGNIA (TAM 61117)

The Bf 109 G-6 national insignia 1:48 masking set by New Ware serves for spraying the national markings instead of applying decals. A sprayed insignia has no glossy film and no edges and cannot silver.
In stock
3.96 €
ReskitRSU72-01261:72

1:72 Lockheed-Martin F-16 (F100-PW) closed exhaust nozzles

Reskit F-16 (F100-PW) closed nozzle 1:72 : a resin, 3D-printed set of the exhaust nozzle in the closed position for F-16 models with the Pratt and Whitney F100 engine. An accessory, not a standalone model.
In stock
6.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.