1:32 F-16a/b/c/d strengthening plates - vinyl

Vinyl masking templates in 1:32 scale for the strengthening plates on the F-16 fuselage let you spray this characteristic detail instead of drawing it on or using a decal.

Scale1:32
Manufacturer Model Maker
Product EAN9991111991823

Responsibility details are not available.

5.16 €
4.26 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Vinyl masks 1:32 - strengthening plates of the F-16A, B, C and D

This is an accessory for a kit, not a model of an aircraft. The set holds pre-cut vinyl masking templates in the shape of the strengthening plates that are clearly apparent on the fuselage skin of real F-16s. On a model these areas can be brought out by spraying a shade's difference of the base color over the mask - the result reads more subtly and more naturally than drawing with a brush and has no glossy edge like a decal. According to the name the templates are cut for the A, B, C and D versions.

Vinyl differs from ordinary paper masking tape in being flexible and conforming better to the rounded surface of the fuselage without the edge wavering.

The real subject

The General Dynamics F-16 Fighting Falcon is a single-engined supersonic machine with its characteristic bubble canopy and a belly air intake. The two-seat B and D versions have a lengthened cockpit for a second crew member. The strengthening plates on the fuselage skin are among the details that anyone who has seen a real machine from close up will notice, and on a model in the large 1:32 scale their absence is missed.

Usage tips

Stick the templates on only once the base coat is dry. Press them down with a toothpick and run a finger over the whole area, so no air pocket is left anywhere. Mix the shade for the plates only slightly different from the surface underneath - too much contrast reads as unconvincing. Spray perpendicular to the surface and in thin layers, since an angled spray runs under. Take the mask off while the paint has only just set, with tweezers and a shallow pull. Then even the whole surface out with a thin coat of varnish, which softens the transition between the shades. Flexible vinyl will take a bend over a curved area, but do not stretch it - a stretched mask relaxes once it is stuck down and the shape shifts.

Who the set is for

  • Builders of the F-16 in 1:32 scale
  • Modelers who work with shade modulation and subtle transitions
  • Those who do not get on with drawing detail with a brush
  • Competition modelers who are after fidelity of surface

The set holds masking templates only. The kit, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is a set of masking templates for a kit in 1:32 scale already bought; the model is not included in the package.

On real machines they are clearly apparent on the fuselage skin, and on a model it is usual to indicate them in a different shade. The mask lets you do that by spraying.

Only a little. The plates should read as another layer of paint, not as a separate area of color, so it pays to lighten or darken the base only slightly.

Vinyl is flexible, conforms better to the rounded fuselage and the edge does not waver. The templates are also already cut to shape.

Last seen

Model MakerMM-CV320011:32

1:32 F-16a/b/c/d strengthening plates - vinyl

Vinyl masking templates in 1:32 scale for the strengthening plates on the F-16 fuselage let you spray this characteristic detail instead of drawing it on or using a decal.
In stock
5.16 €
Amaim Warrior At The Borderline Weapon Set 3 - Kyoukai Senki-25 %Stock ClearanceFavorite
BandaiBAN65093

Amaim Warrior At The Borderline Weapon Set 3 - Kyoukai Senki

Amaim Warrior At The Borderline Weapon Set 3 is a further part of the line of add-on weapon sets for the mecha kits from the Kyoukai Senki series by the manufacturer Bandai. The package contains armament, not a complete robot.
2 left
21.56 €16.16 € You save 5.40 €
1:32 GBU-54 (LJDAM) bombs thermally protected (4 pcs)-25 %Stock ClearanceFavorite
ReskitRS32-05051:32

1:32 GBU-54 (LJDAM) bombs thermally protected (4 pcs)

Four GBU-54 guided bombs in the thermally protected form in 1:32 scale as add-on armament for aircraft models.
Last one!of 6
15.96 €11.96 € You save 4 €
Mettalic DetailsMDP480321:48

1:48 RAF and USAF Aircrew Parachutes (3D-Printed)

Metallic Details 1:48 RAF and USAF aircrew parachutes are 3D-printed resin parachutes for the seats of Allied aircraft models.
In stock
2.76 €
ReskitRS72-03351:72

1:72 Grumman F-4F/FM-2 Wildcat wheels set type 2 (weighted)

Reskit F4F/FM-2 Wildcat wheels type 2 (weighted) 1:72 is an aftermarket resin set of replacement wheels with flattened tires for models of the Grumman Wildcat carrier fighter.
In stock
6.36 €
1:350 Railings 45´ 3 chain bars long-25 %Stock ClearanceFavorite
EduardED990201:350

1:350 Railings 45´ 3 chain bars long

Eduard Railings 45 ft, 3 chain bars, long 1:350 is a universal photo-etched ship railing for detailing ship models in 1:350 scale.
Last one!
14 €10.52 € You save 3.48 €
Green Stuff WorldGSW8857

AQUA TURQUOISE GLOW Resin Crystals - Small

One hundred to one hundred and five cast crystals in a turquoise blue-green form with a glowing effect. Width two to eight millimeters, length six to twelve, with some pieces grown together into pairs and triplets.
In stock
13.96 €
KelikRSK72-02751:72

1:72 Spitfire Mk.II - Interior 3D Decals (for IBG Kits)

Spitfire Mk.II interior 3D decals 1:72 replace hand painting of the instrument panel and the cockpit side consoles. It is not a kit and not a photo-etched set.
In stock
9.56 €
MAiMFDM541:32

1:32 The Magic Rock - Vignette

The Magic Rock Vignette in 1:32 scale from the MAiM marque is a diorama vignette with a stylized rock motif — a scenic base under a figure or a model, not a kit.
In stock
47.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.