FuG 218 Neptun is a 3D printed resin set with the antenna array of the German airborne radar for models of night fighters in 1:32 scale.
Responsibility details are not available.
This is an accessory set of 3D printed resin, not a model on its own. It contains the antenna array of the airborne radar FuG 218 Neptun in the larger 1:32 scale, where the thin rod dipoles and the exact spacing of the antennas come out.
The FuG 218 Neptun was a later German airborne radar for night fighting and for multipurpose use. Its antenna array was mounted on the nose of night fighters and it was carried by machines such as the Me 262 or the Ar 234 and by further types as well. The characteristic feeler-like antennas belong among the most conspicuous features of these aircraft.
Separate the parts carefully from the print supports and the blocks that carry them, sand them gently and wash them. They are bonded with super glue. The thin dipoles are fragile, so handle them with care. Paint them in a shade matching the machine you have chosen.
This is an accessory, not a complete model. The kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
