Printed rib tapes with a lozenge pattern for models of the German fighters Pfalz D.III and D.IIIa in 1:32 scale.
Responsibility details are not available.
The Pfalz D.III and the following D.IIIa were German single-seat fighter biplanes from the later part of the First World War. On the fabric surfaces of German machines of that time a printed cloth with a pattern of irregular polygons often appeared, for which the designation lozenge became established. The fabric was sewn to the ribs and the seam was then covered with a narrow strip of cloth, so that a distinct stripe ran over every rib. It is precisely that which tells most on a model about how the lifting surface was built.
These are flat printed tapes, not a color three-dimensional element. The drawing is printed in a density matching 1:32 scale, so the size of the fields of the pattern suits the size of the model. According to the name the tapes are intended for models of the Pfalz D.III and D.IIIa regardless of whose kit you are building.
The procedure of application differs between the individual Quinta lines, so apply the tapes according to the instructions of the manufacturer enclosed with this set. Cut the tape off close to the drawing and prepare the base beforehand, smooth and degreased. Even out the position with a soft brush and line every tape up before you press it down. Do not use a decal softener or a decal fixer, as the chemicals attack the printed resin. Choose the varnishing over according to the instructions of the manufacturer.
The kit, paints and glue are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!