A masking set in 1:32 scale for the movable surfaces of the Messerschmitt Bf 109 G-10, cut for Hasegawa kits.
Responsibility details are not available.
The Bf 109 G-10 is among the last versions of the German fighter aircraft to reach serial production. It is told from the older machines of the G series by its modified engine cowling with prominent bulges and, on most examples, also by the enlarged sliding cockpit canopy without a transverse brace, for which the Erla designation became established. The ailerons, the elevator and the rudder were fabric-covered, so their surface never looked the same as the smooth metal skin of the rest of the airframe.
The masks follow the outlines of the movable surfaces and are cut for Hasegawa kits in 1:32 scale. In a large scale the division between a deflecting surface and the fixed part of the airframe is very visible and it is enough to suggest it with a shade; the set delimits exactly the area that is to be set off, so the boundary does not vary according to how steady your hand is.
Work only on a dry and degreased base coat. Lay the mask on, press the edge down along its whole length with a blunt point and spray several thin coats at lower pressure. A heavy coat gets under the edge and the edge bleeds. Take the mask off as soon as the paint is dry to the touch, pulling at an angle back over itself. Choose the difference of shades on the subtle side; on a model very little is enough for the eye to complete the surface for itself.
For builders of late Bf 109 versions in a large scale who want to suggest the division of the surface with paint instead of by engraving. The kit, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!