A set of painting masks for a model of the Messerschmitt Bf 109E fighter in 1:32 scale. They are stuck on before spraying and lifted off once the paint has dried.
Responsibility details are not available.
The Messerschmitt Bf 109E is the version of the German single-engine fighter with which the Luftwaffe entered the opening phase of the Second World War. It is usually referred to by the nickname Emil. For modelers it is characterized by the angular canopy made up of a larger number of frames and by squared-off wingtips, so it is exactly the glazing and its sharp framing that take the most work during painting.
This is a set of painting masks for a model of the Bf 109E in 1:32 scale. The masks are stuck onto the model before spraying and lifted off once the paint has dried, so the paint stays only where it should be and the glazing frames get a straight, sharp edge. The extent of the masks and the kit they are cut for are given in the manufacturer's description and instructions, so check the match before you buy.
Free the surface of dust and grease before sticking them on. Set the mask in place dry, check that it fits into the frame, and only then press it down along its whole length with the blunt tip of a pair of tweezers or with a toothpick. Lay the paint on in thin coats; with a thick coat even a well pressed mask will bleed. On the glazing it works well to spray the interior shade of the cockpit first and only then the external camouflage over it. Lift the masks off slowly and at an angle to the surface as soon as the paint is dry to the touch.
The set is intended for use on a model you build yourself. Paints, glue and thinners are not part of the delivery, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!