1:32 TBD-1 Devastator is a single-sided painting mask from Art Scale for a model of the American carrier torpedo aircraft in 1:32 scale. It is not a kit but an aid to painting.
Responsibility details are not available.
A self-adhesive mask cut to shape in advance, which is applied straight onto the clear part. The single-sided form is designed for masking the outer face of the glazing. That is the variant for a modeler who builds the cockpit closed or for whom clean frames seen from outside are enough. Against the double-sided version the work is quicker, because the whole first step of masking the inside falls away.
The Douglas TBD-1 Devastator served with the carrier torpedo squadrons of the US Navy from the second half of the 1930s. It carried a torpedo or bombs under the fuselage and at the time of its introduction was among the most modern machines of its kind. The development of aviation went quickly, though, and at the start of the war it was already slow and vulnerable. After the losses the torpedo squadrons suffered in 1942, a successor type was adopted.
Wash the clear part in lukewarm water with detergent and let it dry properly; on a greasy surface the mask does not hold and the paint creeps under. Lift the individual pieces with the point of a scalpel, not with the fingers. Once they are applied, go over the edges with a toothpick. Spray in thin coats perpendicular to the surface. The timing is crucial: lift the mask off as soon as the varnish is dry to the touch. After several days the paint holds so firmly that the edge may be torn away together with the mask, and a repair on a clear part is unpleasant.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!