XM157 2.75 inch rocket launcher from Metallic Details is a resin set of two rocket pods for unguided rockets of 2.75 inch caliber in 1:32 scale. It is an armament accessory to a model, not a kit.
Responsibility details are not available.
According to the name, this resin set from Metallic Details holds two XM157 underwing rocket pods for unguided rockets of 2.75 inch caliber, in 1:32 scale. The casting makes it possible to bring out the thin edges of the tubes and the broken-up mounting more sharply than injection-molded plastic could manage. It is not a model of a helicopter but an armament accessory.
Unguided rockets of 2.75 inch caliber, that is roughly 70 mm, were the basic firepower of American attack and armed helicopters. They were fired from underwing pods that differed in the number of tubes and in the design of the mounting; seven-round pods were among the most widespread and were carried both by helicopters and by light observation aircraft. The XM157 designation belongs to the same family as the later XM158 and XM159 types, with which it was combined in practice according to the task.
First wash the resin parts in lukewarm water with detergent, because otherwise the paint will not hold on the residue of mold release agent. Cut the casting blocks off with a fine saw or a cutter and sand the surfaces wet, with breathing protection. It is glued with cyanoacrylate glue (super glue). Apply a primer before painting. It pays to darken the mouths of the tubes and to add a faint hint of burnt residue; the pod then does not look like a single solid casting.
This is an accessory set, not a stand-alone model. It is supplied unassembled and unpainted; glue, paints and the base kit are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!