1:35 Modern Russian BMP-3 MICV ERA (For TRUMPETER 00365)

1:35 Modern Russian BMP-3 MICV ERA (For TRUMPETER 00365)

61.96 €
Add to Cart

1:35 Modern Russian BMP-3 MICV ERA (For TRUMPETER 00365)

1:35 BMP-3 with reactive armor is an extensive Voyager Model photo-etched add-on set for a plastic kit of this infantry fighting vehicle you already own. These are metal detail parts, not a model. Intended for the Trumpeter 00365 kit.

Scale1:35
Manufacturer Voyager Model
Product EAN8591111000000

Responsibility details are not available.

61.96 €
51.21 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched detail set BMP-3 with reactive armor in 1:35 scale

This set of photo-etched brass sheet from Voyager Model is prepared for the Trumpeter 00365 plastic kit. It replaces thick plastic parts and supplements the small external equipment. More extensive sets of this kind suit modelers who want to take a vehicle to a competition standard.

The real subject

The BMP-3 is a tracked infantry fighting vehicle with an unusual combination of armament in the turret, made up of a 100 mm gun and a 30 mm autocannon. The vehicle is amphibious and has the engine mounted at the rear, which also affected the way the crew boards it. The add-on reactive armor is fitted as external blocks and adds a quantity of frames and clamps to the silhouette of the vehicle.

Patina and wear down to the metal

With weathering, photo-etched parts offer a possibility plastic does not have. If you deliberately leave a thinner coat of paint on the exposed edges, or burnish it carefully once dry with a glass brush, real brass shows through. The effect of worn metal is then natural, because the metal really is metal. Go about it sparingly, only in the places where wear would genuinely occur, that is on tread surfaces, the edges of fenders and around clamps. Treat the rest of the surface as usual, that is with a dark wash in the recesses and a dry brush on the edges, and finally unify it with a flat clear coat.

Who the set is for

  • Builders of modern tracked vehicles in 1:35 scale
  • Modelers who want accurate frames and clamps for the add-on armor
  • Experienced builders equipped for a more extensive photo-etched build
  • Anyone after realistic weathering with bare metal showing

This is an add-on set for a plastic kit, not a standalone model. The kit, glue, paints and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. The set holds photo-etched metal parts meant for a plastic kit, which you buy separately.

Leave a thinner coat of paint on the exposed edges, or burnish it lightly once dry with a glass brush, so that the brass shows through.

Smaller parts yes, using a steel ruler and the blade of a scalpel. On longer bends a bending tool is markedly more accurate.

It is made for the Trumpeter 00365 kit. It can be used on another model only with modifications and with no guarantee of fit.

Last seen

Voyager ModelPE354041:35

1:35 Modern Russian BMP-3 MICV ERA (For TRUMPETER 00365)

1:35 BMP-3 with reactive armor is an extensive Voyager Model photo-etched add-on set for a plastic kit of this infantry fighting vehicle you already own. These are metal detail parts, not a model. Intended for the Trumpeter 00365 kit.
In stock
61.96 €
TrumpeterTR015401:35

1:35 German Geschutzwagen VI 21cm Msr 18 (sf)

A plastic kit of the German Geschützwagen VI 21cm Mörser 18 (sf) (Trumpeter) in 1:35 scale - a heavy self-propelled mortar on a chassis derived from the Tiger.
In stock
41.56 €
ReskitRSU72-01061:72

1:72 Eurofighter EF-2000A/EF-2000B Typhoon open exhaust nozzles

Reskit 1:72 Eurofighter Typhoon - open exhaust nozzles is a resin detail set for models of the Eurofighter EF-2000A/EF-2000B in 1:72. It replaces the exhaust nozzles with a part that has the nozzles in the open position.
In stock
15.16 €
Voyager ModelPE353281:35

1:35 WWII German Panzerjager-Triebwagen 51 (For HobbyBoss)

1:35 Panzerjäger-Triebwagen 51 is a Voyager Model photo-etched add-on set for a plastic kit of the German armored railcar you already own, not a standalone model. It adds thin metal parts where injection-molded plastic is not enough. Cut for the Hobby Boss kit.
In stock
15.96 €
EduardED328681:32

1:32 Seatbelts USAAF WWII STEEL

Eduard 1:32 USAAF seat belts of the Second World War STEEL is a set of pre-colored steel photo-etched safety belts for the cockpits of American aircraft.
In stock
13.80 €
MH modelsMHX720221:72

1:72 Douglas A-20G Havoc canopy airbrush mask for MPM

A masking set for the glazing of the Douglas A-20G Havoc in 1:72 scale replaces the laborious cutting of masking tape with pre-cut templates for spraying the cockpit frames with an airbrush.
In stock
2.76 €
Royal ModelRM9851:48

1:48 German tanker leaning against the wall - WWII

The small figure 1:48 German tanker leaning against the wall - WWII captures a German tanker in a relaxed stance with his back against a wall.
In stock
10.36 €
EduardED331991:32

1:32 I-153 Chaika seatbelts STEEL

I-153 Chaika seatbelts STEEL 1:32 is a pre-colored steel photo-etched set of seat belts for models of the I-153 Chaika biplane in 1:32 scale from Eduard.
In stock
6.80 €
MH modelsMHX720731:72

1:72 Short Sunderland Mk.III Canopy airbrush mask

Short Sunderland Mk.III canopy 1:72 (MH Models) is a set of self-adhesive painting masks for a clean spray of the glazing framing on a model of the British Short Sunderland flying boat in its Mk.III version.
In stock
6 €
TrumpeterTR055281:35

1:35 German Neubaufahrzeug (Rheinmetall)

1:35 German Neubaufahrzeug (Rheinmetall) is a plastic kit of the German multi-turret heavy tank of the 1930s from Trumpeter, in the configuration with the main turret of Rheinmetall design.
In stock
26.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.