1:35 US Army tanker in winter clothes set

1:35 Set of US Army tankers in winter clothing is a set of resin figures from the PANZER ART brand for a winter diorama or for open hatches.

Scale1:35
Manufacturer PANZER ART
Product EAN9991111315112

Responsibility details are not available.

27.56 €
22.78 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:35 US Army tankers in winter clothing — PANZER ART resin figures

A set of figures cast in resin in 1:35 from the PANZER ART brand. It is not a vehicle kit but an add-on that gives a model scale and a story. From a modeling point of view winter clothing is a different job from summer: the layering of a jacket, trousers and gloves changes the silhouette of a figure, the fabric is coarser and the folds are broader and softer. Resin holds those transitions sharp, so once painted it shows where one layer ends and the next begins.

Preparing the castings

Wash the parts in lukewarm water with dish soap, so that the mold release agent disappears — paint does not hold on a greasy surface. Separate the casting block with a saw leaving a margin and sand the remainder down; do not breathe in resin dust, and sand wet or with a respirator. Before gluing, check how a figure settles into the place you want to seat it, and adjust the face if need be. It is glued with cyanoacrylate glue, and the gel version gives time to line the arms and the head up. Then apply a primer.

Painting winter clothing

Set the individual layers apart by tone as well as by texture: an outer jacket tends to be a touch lighter and coarser than the trousers, and fur and knitwear are handled differently from smooth fabric. Lay the base down in a continuous tone and model the volume with glazes — darker into the folds, lighter stippled onto the raised places. In a winter scene a cooler shade of the shadows comes in handy, suggesting the ambient light off the snow. Paint the skin separately and leave the face and the hands warmer, so that they stand out against the subdued clothing. Finish the whole set with a matte clear coat; if you are setting the figures into a snow scene, add fine remains of white pigment on the boots and the lower hems of the trousers.

Who the set is for

  • builders of winter dioramas in 1:35
  • modelers who want to fill the hatches of a model of American equipment
  • anyone interested in painting layered clothing and various textile surfaces

The figures are supplied unassembled and unpainted. The vehicle, paints, glue and a base are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The name marks a set, that is more than one figure; check the number against the illustration on the packaging.

Set the layers apart by tone as well as by texture — the outer jacket lighter and coarser than the trousers. Model the volume with glazes, darker into the folds and lighter onto the raised places.

Wash in water with dish soap because of the mold release agent, separate the casting block with a saw, sand it down wet or with a respirator and spray a primer. It is glued with cyanoacrylate glue.

Winter clothing settles the scene fairly clearly. For a summer diorama, figures in lighter clothing suit better, or the set reads as mismatched.

Last seen

PANZER ARTFI35-0061:35

1:35 US Army tanker in winter clothes set

1:35 Set of US Army tankers in winter clothing is a set of resin figures from the PANZER ART brand for a winter diorama or for open hatches.
In stock
27.56 €
Aires/QuickboostQB721411:72

1:72 B-24D Liberator gun barrels

Quickboost 1:72 B-24D Liberator gun barrels is a resin set of replacement barrels for the bomber's defensive armament. It is not an aircraft model : it is an accessory for modelers, and the kit is not included in the package.
In stock
3.56 €
Aires/QuickboostQB489881:48

1:48 B-17 flying forrtress gun barrels

B-17 Flying Fortress machine gun barrels 1:48 (Quickboost) are a resin detail accessory, not an airplane model. This set of accurately cast defensive machine gun barrels replaces the plastic parts on the B-17 bomber kit in 1:48 scale.
In stock
4.76 €
IBG modelsWAW0081:72

1:72 Pz.Kpfw. IV Ausf. B

Pz.Kpfw. IV Ausf. B 1:72 from the Polish maker IBG models is a plastic kit of the early version of the German medium tank with the short 7.5 cm gun.
In stock
9.56 €
SBS ModelSBS480401:48

1:48 Mig-21 PF cockpit set

A resin cockpit set for the MiG-21 PF in 1:48 scale sharpens up the pilot's station on a model of this jet fighter.
In stock
13.16 €
Military RevueMRE16-07-08

Military Revue 07-08/2016

Military Revue 07-08/2016 is a Czech periodical devoted to military history, equipment and present-day armed forces.
In stock
2.36 €
PeewitPWM722761:72

1:72 Convair XFY-1 POGO

Masking set 1:72 Convair XFY-1 Pogo from the manufacturer Peewit is an accessory for covering the glazing of a model during spraying. It is not a kit of the aircraft.
In stock
3.16 €
1:48 GBU-31 JDAM, Mk-84 Warhead (4 pcs)-25 %Stock ClearanceFavorite
AMMO of Mig JimenezA.MIG-110161:48

1:48 GBU-31 JDAM, Mk-84 Warhead (4 pcs)

The two-ton 1:48 GBU-31 JDAM, Mk-84 Warhead bomb from AMMO of Mig Jimenez represents the most common form of American guided ordnance.
3 leftof 5
18.76 €14.08 € You save 4.68 €
FujimiFU42271

Chibi-Maru Fleet Battleship Ise/Hyuga

Chibi-Maru Fleet Battleship Ise/Hyuga is a cute shortened kit of an Ise-class battleship from Fujimi, devoted to the sister ships Ise and Hyuga in their classic battleship form. This is not a scale model — the ship is deliberately distorted into a friendly form.
In stock
26.36 €
EvergreenEVG8108

Profil HO proužek 0,3 x 2,3 mm

A smooth Evergreen polystyrene strip with a 0.3x2.3 mm section. A versatile material for cladding, battens and strips, supplied singly.
In stock
0.32 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.