1:35 WWII US M40 SPG Basic (Atenna base include) (For AFV CLUB AF35031)

1:35 WWII US M40 SPG Basic (Atenna base include) (For AFV CLUB AF35031)

25.16 €
Add to Cart

1:35 WWII US M40 SPG Basic (Atenna base include) (For AFV CLUB AF35031)

Voyager Model 1:35 M40 SPG – basic photo-etched set with an antenna base is a photo-etched accessory for a plastic kit you already own, not a standalone model. It is cut for the AFV Club 35031 kit.

Scale1:35
Manufacturer Voyager Model
Product EAN8591111000000

Responsibility details are not available.

25.16 €
20.79 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Voyager Model 1:35 M40 SPG – basic photo-etched set with an antenna base

This is not a model but a set of photo-etched brass parts. It is bought for a plastic kit the modeler already has and is cut exactly for the molding given in the product name. According to the name of the set, an antenna base is included as well. The scope of the package and the number of frets is not stated here.

The real subject

The M40 was an American 155 mm gun motor carriage, that is a self-propelled gun introduced at the close of the Second World War. It was built on a chassis derived from the M4 medium tank with HVSS suspension, wide tracks and a longer hull, so as to carry the weight of the weapon. The crew compartment was open at the top, and at the rear the machine had a folding bracing spade to take the recoil. Vehicles of this type were used in the postwar years as well.

Tips for working with photo-etched parts

Preparing the surface is what shows most in the result. Brass comes from the factory carrying grease from the etching process and from fingers, and paint then only appears to hold on it: it will lift off in whole patches during handling. So before building, wash the parts in warm water with a drop of dish soap, rinse them and let them dry, and from then on touch them only with tweezers or in gloves. Once they are glued, spray a thin primer meant for metal, ideally in two light passes with an airbrush rather than one heavy coat. Only onto dry primer should the paint go, again more thinly than on plastic, so that the texture of the photo-etched parts stays apparent.

Who the set is for

  • Modelers building American artillery of the Second World War in 1:35 scale
  • Builders who want to sharpen up thin sheet, covers and brackets
  • More advanced modelers working with cyanoacrylate and a primer for metal
  • Competition and display-case builds with demands on detail

The set is an accessory for a plastic kit, which it does not include. The glue, paints and tools are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. These are photo-etched brass parts meant to be fitted to a separately sold plastic kit.

Voyager Model releases variants of the same set cut for the moldings of different kit manufacturers. Always go by the target kit, AFV Club 35031.

Yes. Degrease the brass and spray it with a primer for metal, otherwise the paint comes away in patches during handling.

A scalpel or photo-etch scissors, a hard surface, sharp tweezers and cyanoacrylate. A photo-etch bender makes the work markedly more accurate.

Last seen

Voyager ModelPE358791:35

1:35 WWII US M40 SPG Basic (Atenna base include) (For AFV CLUB AF35031)

Voyager Model 1:35 M40 SPG – basic photo-etched set with an antenna base is a photo-etched accessory for a plastic kit you already own, not a standalone model. It is cut for the AFV Club 35031 kit.
In stock
25.16 €
Quinta StudioQR350341:35

1:35 ZIL-130 floor mat (Zvezda)

A color floor mat for the cabin of the ZIL-130 truck in 1:35 scale, according to the name prepared for the Zvezda kit.
In stock
4.36 €
Dead DesignVM721461:72

1:72 Ki-109 Experimental Interceptor Canopy Mask (Hasegawa)

The canopy masks 1:72 Ki-109 Experimental Interceptor Canopy Mask from Dead Design are for a model of the Japanese heavy interceptor with gun armament.
In stock
8.76 €
AMMO of Mig JimenezA.MIG-112311:72

1:72 MK-82 with MAU-93/B conical fin (6 pcs)

1:72 MK-82 with the MAU-93/B conical fin (6 pcs) is a resin, 3D-printed set of aircraft bombs from AMMO intended for arming fighter and attack models.
In stock
9.16 €
1:72 BRITISH INFANTRY AND SEPOYS
-49 %
Favorite
SaleV-IT61871:72

1:72 BRITISH INFANTRY AND SEPOYS

A set of figures of British infantry and sepoys in 1:72 scale, supplied for painting and for building colonial scenes.
In stock
10.20 €5.16 € You save 5.04 €
AiresAIR72431:72

1:72 F-8 Crusader wheels & paint masks

A resin set of wheels and masking film for the F-8 Crusader in 1:72 scale from Aires. An accessory for a kit, not an airplane model.
In stock
5.20 €
ŘOP o.s.F1000/0301:1000

1:1000 MO-Sm-S 41 ,,Nad Valchou,,

ROP o.s. 1:1000 MO-Sm-S 41 Nad Valchou is a small model of a work of the Czechoslovak heavy fortifications in a map scale.
In stock
4.36 €
BrengunBRL722421:72

1:72 US WWII 75 gal fuel tank (2pcs)

US WWII 75 gal fuel tank (2 pieces) is a resin accessory in 1:72 scale — a pair of drop tanks for American aircraft of the Second World War.
In stock
6.76 €
AVD Models1491AVD1:43

1:43 VAZ-2121 LADA NIVA Campe

A plastic kit of the Soviet off-road vehicle VAZ-2121 Lada Niva in 1:43 scale, the collector scale for car models.
In stock
29.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.