Masking film for the deck 1:350 for the German destroyer Z-32 from Artwox Model is a set of pre-cut self-adhesive stencils with which you separate the wooden areas of the deck from the metal ones without laboriously cutting strips. Cut for the Dragon 1065 kit.
Responsibility details are not available.
This is neither a kit nor a wooden veneer but an accessory for a plastic ship kit in 1:350 scale. Sheets of thin self-adhesive film are machine cut to the shape of the deck areas and serve for masking during spraying. The deck thereby stays at the original height of the plastic, the engraved details and the locating points for the superstructures stay readable, and the modeler saves hours of cutting masking tape into complicated shapes.
The usual procedure has two stages. First the wood shade is sprayed over the whole deck and left to dry thoroughly, ideally overnight. Then the individual pieces are taken off the film and stuck exactly onto the wooden areas, and the edges are pressed down with a wooden stick or a toothpick so that paint does not creep under them. Spraying of the metal areas follows, and once it has set, not after it has fully cured, the mask is pulled off. The order can also be reversed if you want the wood on top.
A destroyer has a narrow deck with a great many openings, so it pays to keep a sharp scalpel with a fresh blade at hand and to stick small offcuts of film around protrusions. Degrease the plastic before sticking; on a greasy surface a mask will not hold. Apply the paint in thin coats and at a lower pressure, as a heavy coat creates a step at the edge that stands out once the mask is off.
This is an accessory for a plastic kit, not a model. The kit, paints and glue are not included in the package. The accessory is cut for the Dragon 1065 kit; please check the match before buying.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!