1:350 Italian Navy RN Littorio 1941 Deck Masking Sheet (for Trumpeter kit 05319)

1:350 Italian Navy RN Littorio 1941 Deck Masking Sheet (for Trumpeter kit 05319)

5.56 €
Add to Cart

1:350 Italian Navy RN Littorio 1941 Deck Masking Sheet (for Trumpeter kit 05319)

Masking film for the deck 1:350 for the Italian battleship Littorio 1941 from Artwox Model is a pre-cut self-adhesive stencil for cleanly separating the wooden and metal areas during spraying. The sheets are cut to the deck areas of the Trumpeter 05319 kit.

Scale1:350
Manufacturer Artwox Model
Product EAN8591111000000

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Masking film for the deck 1:350 - Littorio 1941 (Artwox Model)

An accessory for a ship kit in 1:350 scale. The contents are sheets of thin self-adhesive film machine cut to the outlines of the deck areas. This is therefore neither a wooden deck nor a model, but an aid with which an accurate boundary between colors arises on the plastic.

Preparing the surface decides it

A mask holds only on a clean and smooth base. Free the deck of flash first, sand it with very fine paper and then wash it with warm water and a drop of detergent, or wipe it with alcohol. A thin coat of primer follows, which evens out the absorbency and at the same time gives the film something to hold on to. On bare glossy plastic a mask either does not stick well or, conversely, pulls the paint off.

Application tips

The bow has a marked curve and the film has to be laid on it without creases. It helps to divide long pieces into shorter sections and glue them with a small overlap; on a hull of this type that is markedly safer than forcing one long strip into the curve. Press the edges down with a blunt wooden point along their whole length. Spray at right angles to the surface, not at a sharp angle, or the air will drive mist under the edge. Take the mask off as soon as the paint has set, drawing it back over itself at a sharp angle rather than straight upward.

Who the film is for

  • Modelers who prefer a sprayed deck to veneer.
  • Builders of ships with a complex deck and many openings.
  • Those who want to save time on masking by hand.
  • An accessory for a ship kit in 1:350 scale.

This is an accessory for the plastic kit Trumpeter 05319, not a model. The kit, paints and glue are not included in the package. The accessory is cut for one particular kit; please check the match before buying.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No, this item holds masking films only. You spray the deck with paint yourself.

We recommend it. On a base coat a mask holds more reliably and will not pull the paint off bare plastic when removed.

Press the edges down with a blunt wooden point, spray at right angles and in thin coats. A heavy wet coat creeps under almost every time.

Do not count on it. The cuts match one particular kit, Trumpeter 05319.

Last seen

Artwox ModelBM100201:350

1:350 Italian Navy RN Littorio 1941 Deck Masking Sheet (for Trumpeter kit 05319)

Masking film for the deck 1:350 for the Italian battleship Littorio 1941 from Artwox Model is a pre-cut self-adhesive stencil for cleanly separating the wooden and metal areas during spraying. The sheets are cut to the deck areas of the Trumpeter 05319 kit.
In stock
5.56 €
ReskitRSU72-03131:72

1:72 F-104 (S/G-late) Starfighter exhaust nozzle for Revell/Monogram kit

An accessory nozzle for the late Starfighters in 1:72 scale , a resin casting cut for Revell and Monogram kits.
In stock
13.16 €
ReskitRSU48-04181:48

1:48 150 gallon fuel tank AERO 1C USN & USMC (2 pcs) for Douglas A-4 Skyhawk

AERO 1C 150 gallon auxiliary fuel tank 1:48 (2 pieces, Reskit) is a resin 3D-printed accessory for models of the A-4 Skyhawk.
In stock
13.96 €
ELEFANTELE351581:35

1:35 TOW CABLE CLAMPS AND BRACKETS FOR STUG. III F/8 - G MID, FOR 2 VEHICLES

ELEFANT 1:35 tow cable clamps and brackets for the StuG III F/8 – G mid is a resin (3D printed) set for two vehicles in 1:35 scale.
In stock
5.16 €
ReskitRSU48-05361:48

1:48 F/A-18 Hornet exhaust nozzles for Hasegawa kit

F/A-18 Hornet exhaust nozzles are a 3D-printed (resin) detail accessory for building the American carrier-based fighter in 1:48 scale, designed for the Hasegawa injection-molded kit. This is not a standalone model, but a set of replacement parts.
In stock
24.36 €
PeewitPWM721411:72

1:72 Praga E-114B "Air Baby"/ Hilson/Praga E-114B "Air Baby"

1:72 Praga E-114B Air Baby is a set of self-adhesive masking templates from Peewit for models of this light aircraft.
In stock
3.16 €
FlyhawkFH3500321:350

1:350 French 380mm/45 model 1935 Metal Barrels (9 Pcs.)

Turned metal barrels of 380 mm/45 model 1935 in 1:350 are a set of nine barrels of a French naval gun from the manufacturer Flyhawk. It is not a ship kit but a detail accessory with which the plastic barrels of the main armament are replaced on a finished model.
In stock
11.16 €
ReskitRSU72-03151:72

1:72 F-104 (A, C, D, J, G) Starfighter exhaust nozzle for Revell/Monogram kit

1:72 F-104 (A, C, D, J, G) Starfighter exhaust nozzle for Revell/Monogram kit is a replacement engine exhaust nozzle. The set is cut for the Revell and Monogram kits.
In stock
13.16 €
ReskitRSF32-00581:32

1:32 LTV A-7D/A-7E Corsair II Greece male pilot (in a standing position - type 3) (1 pcs)

A-7 Corsair II Greek pilot standing (type 3) is a 3D-printed resin figure in 1:32 scale from the maker Reskit, intended to fill out aircraft models.
In stock
13.56 €
Kits-WorldKW3D14810801:48

1:48 Vought F4U-5 Corsair 3D Colour Interior Cockpit Set (for Hobby Boss kits)

Full-color layered decals for the cockpit of the postwar Vought F4U-5 Corsair fighter in 1:48 scale, prepared for Hobby Boss kits.
In stock
13.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.