1:350 USS Wasp LHD-1 part 1

Photo-etched set for the model of the USS Wasp LHD-1 amphibious assault ship in 1:350 scale, listed as part one. The metal parts replace details that are always too thick in plastic.

Scale1:350
Manufacturer Eduard
Product EAN8591111281324

Responsibility details are not available.

37 € 27.76 €
22.94 € without VAT
−25 % You save 9.24 €
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Photo-etched parts for the USS Wasp LHD-1 in 1:350 scale

An accessory set of photo-etched metal parts for the model of the American USS Wasp amphibious assault ship in 1:350 scale. According to the name it is part one, so this is one piece of a split set.

The real subject

The USS Wasp, with the designation LHD-1, is an American amphibious assault ship and the first unit of her class. She has a continuous flight deck running her whole length, a hangar for helicopters and, in the stern, a floodable well deck for landing craft. She thus combines the tasks of an aircraft carrier and of a ship for putting troops ashore.

Why photo-etch on a ship model

A ship model in 1:350 scale stands or falls on its thin elements. Railings, ladders, gratings and antenna elements measure only a few centimeters on the real ship and come out at a fraction of a millimeter in this scale. Injection-molded plastic cannot do that, so it either leaves them molded as a solid wall or does not deal with them at all. A photo-etched metal part has the correct thickness and the viewer then sees the outline of the deck through the railing, which transforms a finished model more than any other accessory.

  • Photo-etched metal parts for the USS Wasp LHD-1 in 1:350 scale
  • According to the name, part one of the set
  • Photo-etched metal for railings, ladders and gratings
  • An accessory for a kit; the model is not included in the set
  • Intended for builders of ship models with experience of photo-etch

Building and painting tips

Cut the parts off the fret with a sharp blade on a hard surface, not with scissors. Bend long strips of railing gradually over a straight edge and seat them on the deck in shorter sections, otherwise they will ripple. They are bonded with a drop of super glue applied with the tip of a pin. Wash the metal before painting, degrease it and lay down a primer so that the paint holds.

The package holds the photo-etched parts. The kit, the paints and the glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Photo-etched metal parts for the model of the USS Wasp LHD-1 in 1:350 scale, listed as part one. The kit, the paints and the glue are not included, unless stated otherwise.

The label says that this is one piece of a split set. Count on it not necessarily covering the whole model on its own.

A drop of super glue applied with the tip of a pin. Polystyrene cement has no effect on metal.

Bend it gradually over a straight edge and glue it in shorter sections. A long strip glued all at once pulls tight before you can straighten it.

Last seen

1:350 USS Wasp LHD-1 part 1-25 %Stock ClearanceFavorite
EduardED533181:350

1:350 USS Wasp LHD-1 part 1

Photo-etched set for the model of the USS Wasp LHD-1 amphibious assault ship in 1:350 scale, listed as part one. The metal parts replace details that are always too thick in plastic.
Last one!of 2
37 €27.76 € You save 9.24 €
HGWHGW1326131:32

1:32 MESSERSCHMITT BF109E-7 - PÁSY

Fabric seat belts with photo-etched buckles for Messerschmitt Bf 109E-7 models in 1:32 scale.
In stock
9.64 €
1:350 USS Ranger CV-4 part 3-25 %Stock ClearanceFavorite
EduardED533131:350

1:350 USS Ranger CV-4 part 3

1:350 USS Ranger CV-4 part 3 - the third part of the Eduard photo-etched line for the American aircraft carrier in 1:350 scale.
2 left
37 €27.76 € You save 9.24 €
HGWHGW1245021:24

1:24 Luftwaffe Fighters - Late

HGW fabric seat belts – Luftwaffe Fighters Late (1:24) are universal fabric seat belts for the cockpit in 1:24 scale for late fighters of the Luftwaffe.
In stock
10.48 €
1:350 USS Midway CV-41 part 2 -25 %Stock ClearanceFavorite
EduardED533151:350

1:350 USS Midway CV-41 part 2

Eduard 1:350 USS Midway CV-41 part 2 is a photo-etched set intended to refine a plastic model of this American aircraft carrier.
4 leftof 6
37 €27.76 € You save 9.24 €
Arma HobbyAH700931:72

1:72 Curtiss H-75 A1 / A2

Curtiss H-75 A1 / A2 is a plastic kit in 1:72 scale from the Polish manufacturer Arma Hobby. It captures an American fighter in French service.
In stock
19.96 €
1:350 USS Wasp LHD-1 part 5-25 %Stock ClearanceFavorite
EduardED533221:350

1:350 USS Wasp LHD-1 part 5

1:350 USS Wasp LHD-1 part 5 is the fifth Eduard photo-etched set for the model of the American multipurpose amphibious assault ship in 1:350 scale.
Last one!of 2
20.80 €15.60 € You save 5.20 €
HK modelsHK01EA031:32

1:32 Douglas A-20 Havoc Metal Landing Gear for HK-01E039

Metal landing gear legs for the Douglas A-20 Havoc 1:32 are a replacement landing gear in metal that takes the weight of a large bomber model better than the plastic parts.
In stock
3.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.