1:48 A-4E Skyhawk 3D-Printed & coloured Interior on decal paper (Hobby Boss)

1:48 A-4E Skyhawk 3D-Printed & coloured Interior on decal paper (Hobby Boss)

11.56 €
Add to Cart

1:48 A-4E Skyhawk 3D-Printed & coloured Interior on decal paper (Hobby Boss)

Colored three-dimensional Quinta interior elements for the A-4E Skyhawk in 1:48 scale, prepared for the Hobby Boss kit. The elements are soaked briefly in lukewarm water and slid off the backing paper.

Scale1:48
Manufacturer Quinta Studio
Product EAN8591111783599

Responsibility details are not available.

11.56 €
9.55 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The Douglas A-4 Skyhawk is a small single-seat carrier attack aircraft with a delta wing, a wing so short that it managed without folding on deck. The A-4E version is among the well-known forms of the Cold War. Its cockpit sits high and under the large canopy practically the whole of it can be seen, so it is here that a neglected interior shows up first on a model.

What the set contains

Colored three-dimensional interior elements with a raised surface, so that the instruments, the controls and the lettering have real relief. The elements are printed on backing decal paper, from which they are slid off: they have no adhesive layer of their own and the part is soaked for about fifteen seconds in lukewarm water before it is fitted. Decal softener and setting solution do not belong on them; the chemicals would damage the printed resin. The set is prepared for the Hobby Boss kit and so allows for the shape and layout of its parts; on a kit from another brand the panels may not meet.

Installation tips

  • Spray the areas under the elements first, let them dry properly and go over them with a gloss clear coat (Future or Klear, Tamiya X-22); the elements hold best on a smooth glossy surface.
  • Cut the individual parts out with a sharp blade, leave them in lukewarm water for about fifteen seconds and slide them off the paper into place.
  • Press them down with a cotton swab; on curved walls work in sections, and in a broken-up place help it along with a drop of cyanoacrylate glue.
  • Finish the interior before you close up the fuselage and fit the canopy.
  • The extent of the cockpit coverage is given in the manufacturer's instructions; go through them before building.

Who it is for

For builders who want the cockpit finished in color without painting tiny dials with a brush. Fitting them is careful rather than demanding work; tweezers, a sharp blade and plenty of time come in useful. The kit, paints and glue are not included, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

They are. Soak the part you have cut out for about fifteen seconds in lukewarm water and slide it off the backing paper into place. It has no adhesive layer of its own, it holds on a gloss clear coat, and a softener does not belong on it.

It is prepared for the A-4E kit from Hobby Boss in 1:48 scale. On another kit the shape of the panels may not match.

The elements come finished in color. It is a good idea, though, to spray the area beneath them in advance and go over it with a gloss clear coat, so that bare plastic does not show through and the element holds well.

Before you close up the fuselage and fit the canopy. You can no longer get into a finished cockpit with tweezers.

Last seen

Quinta StudioQD486211:48

1:48 A-4E Skyhawk 3D-Printed & coloured Interior on decal paper (Hobby Boss)

Colored three-dimensional Quinta interior elements for the A-4E Skyhawk in 1:48 scale, prepared for the Hobby Boss kit. The elements are soaked briefly in lukewarm water and slid off the backing paper.
In stock
11.56 €
Model MakerMM-D721851:72

1:72 Lockheed F-104 German JaboG 34 25/50 Anniversary

The 1:72 Lockheed F-104 German JaboG 34 Anniversary decal set from the manufacturer Model Maker brings the anniversary markings of a German Starfighter of the JaboG 34 wing.
In stock
4.36 €
ReskitRS48-00051:48

1:48 Northrop F-5 (F/N), KF-5F

Wheel set for the F-5 (F/N) and KF-5F in 1:48 scale – a resin and 3D-printed detail accessory from Reskit.
In stock
6.76 €
XtradecalX723351:72

1:72 'Blackjack' RAF 2021 Display Eurofighter Typhoon FGR.4

Blackjack — Eurofighter Typhoon FGR.4, decals (1:72, Xtradecal) bring the special finish of the RAF display machine of the 2021 season.
In stock
14.76 €
ELEFANTELE351341:35

1:35 GERMAN TOOL CLAMPS TYPE 2, CLOSED AND OPEN VARIANT, TOTAL 160 CLAMPS

ELEFANT - German tool clamps type 2 (1:35) is a resin set of tool brackets of a different shape than type 1, in both closed and open versions, 160 clamps in all.
In stock
13.96 €
OmaskOMK772451:72

1:72 Me-262 wheel bay plugs (for Revell)

Omask 1:72 Me-262 — Wheel Bay Plugs (for Revell) are shaped foam plugs that seal the model's bays for spraying. It is not a kit, but a masking accessory.
In stock
3.20 €
Voyager ModelPE354411:35

1:35 Modern German Boxer MRAV (hobby boss 824800)

The Voyager Model 1:35 photo-etched detail set for the modern German Boxer wheeled armored vehicle is an aftermarket accessory for the Hobby Boss 824800 plastic kit you already own. What it holds is photo-etched brass parts, not a model of the vehicle.
In stock
19.96 €
Aires/AerobonusAER3200921:32

1:32 Soviet WWII Pilot for MiG-3 with seat

The resin figure Soviet WWII Pilot for MiG-3 with seat (1:32, Aerobonus) : a figure of a Soviet pilot of the Second World War together with a seat for the MiG-3 fighter.
In stock
9.20 €
MiryokuMIR/D480091:48

1:48 P-51D MUSTANG - OBOUSTRANNÉ MASKY

Miryoku 1:48 P-51D Mustang, double-sided masks are cut self-adhesive masks for the glazing of a model of the P-51D fighter. An accessory to a kit in 1:48 scale, not a model.
In stock
7.20 €
1:700 German Navy Aircraft Carrier DKM Graf Zeppelin-25 %Stock ClearanceFavorite
TrumpeterTR067091:700

1:700 German Navy Aircraft Carrier DKM Graf Zeppelin

Trumpeter 1:700 German Navy Aircraft Carrier DKM Graf Zeppelin is an injection-molded plastic kit of the only German aircraft carrier, in 1:700 scale.
Last one!of 6
35.96 €26.96 € You save 9 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.