1:48 B-26 Tail Shell Case Collector for ICM kit

An accessory part in 1:48 scale: a shell case collector for the tail section of the B-26, prepared for the ICM kit.

Scale1:48
Manufacturer CMK
Product EAN8591111546874

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

What the part is for

A shell case collector catches the spent cases from the guns in the tail section of the B-26. The accessory is prepared for the ICM kit in 1:48 scale and adds to a finished model a detail that is visible at first glance and in the kit tends to be treated only in a simplified way. Being intended for a particular kit means that the shape of the mating surfaces is designed directly for it, so lengthy adapting is unnecessary.

What the set contains

An accessory part in 1:48 scale for the named kit. The exact number of pieces, the placement and any modification of the kit parts are given in the manufacturer's instructions. The parts are not of polystyrene, so they are glued with cyanoacrylate glue, not with classic cement for plastic models. Dose the cyanoacrylate glue in drops on the tip of a toothpick, so that it does not run around the joint.

Building and painting tips

Cut off the excess material with a sharp blade a little way from the part and sand the remainder carefully; cutting close to the part easily bites off an edge that is then hard to make good. Before painting, wash and degrease the part, otherwise the paint holds badly and peels during handling. Try the fit dry and adjust the mating surface on the kit as needed. The edges and hollows are brought out by a dark wash shade applied onto a dry finish.

Who it is for

The accessory aims at modelers who are building the named kit and want to take the tail section closer to the real thing. Even a modeler without experience of accessories will manage it, as long as they try the fit dry. The kit the part is intended for, and paints and glue, are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is prepared for the ICM kit in 1:48 scale. The exact placement and any modifications are given in the manufacturer's instructions.

Cyanoacrylate glue. Classic cement for plastic models does not work here, because the parts are not of polystyrene.

Cut off the excess material with a sharp blade a little way from the part, sand the remainder and wash and degrease the part.

It is not, unless stated otherwise. It is an accessory for a model you obtain separately.

Last seen

CMKCMK44881:48

1:48 B-26 Tail Shell Case Collector for ICM kit

An accessory part in 1:48 scale: a shell case collector for the tail section of the B-26, prepared for the ICM kit.
In stock
3.56 €
Airone HobbyAHL720581:72

1:72 US Navy pre-war cameras

Prewar US Navy aerial cameras in 1:72 scale are a resin accessory set from Airone Hobby. It is not a model of an aircraft, but small equipment for detailed rendering and for a diorama.
In stock
5.40 €
AiresAIR71971:72

1:72 J35FS Draken cockpit set

The J35FS Draken cockpit set 1:72 is a resin cockpit detail set from Aires. An accessory for an accurate cockpit on the Draken; it is not a model.
In stock
12.80 €
EduardED6320331:32

1:32 B-17 superchargers

Eduard B-17 superchargers 1:32 is a resin set of turbo-superchargers for refining models of the B-17G bomber in 1:32 scale. It is not an aircraft kit, but a refining accessory.
In stock
10.40 €
1:32 B-17G engine No.3-25 %Stock ClearanceFavorite
EduardED6320291:32

1:32 B-17G engine No.3

Eduard 1:32 B-17G engine No. 3 is a resin (Brassin) set from the manufacturer Eduard with one of the engines rendered faithfully for the model of the B-17G Flying Fortress bomber in 1:32 scale. It is not a model.
3 leftof 4
23 €17.24 € You save 5.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.