A cockpit set for a model of the F-104 Starfighter in the C and J versions, 1:48 scale. It replaces the cockpit from the kit.
Responsibility details are not available.
The F-104 Starfighter is a supersonic aircraft you recognize at first glance: a long slender fuselage and, against it, an unusually small wing with sharp leading edges. The cockpit in such a fuselage is narrow and the pilot sits high in it, so with the canopy open you can see into it well. The letters C and J in the name denote the two versions of the aircraft the set is intended for.
It is an accessory cockpit set for 1:48 scale, that is, a replacement for the parts from the kit. The exact composition and which kit the set fits are given in the manufacturer's instructions; try the parts dry before gluing and only then start reworking anything. Cockpit sets usually call for thinning the inner fuselage walls so that the halves can be closed without a gap once the tub is in place.
Assemble, paint and shade the cockpit before you glue the fuselage together; afterwards you will not get inside. The parts are not polystyrene and are bonded with super glue. Cut off the surplus material with a sharp blade a little away from the part and sand the rest down, and wash and degrease the surface before painting.
The set is for a modeler who is building a Starfighter with the canopy open and wants a cockpit with more going on in it than the kit provides. The aircraft model, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
