A single-sided painting mask for the F4U-1D Corsair in 1:48 scale by Art Scale. Cut self-adhesive masks for the outer side of the canopy glazing. The masks are cut for the glazing of the Hobby Boss kit.
Responsibility details are not available.
Pre-cut self-adhesive masks for the glazing frames of a model of the American carrier fighter in 1:48 scale. It is a painting aid, not a kit. The single-sided form covers the outer surface of the glazing; the double-sided variant of the same type is worth giving preference to only when you want to spray the inner side of the frames separately. The set is cut for the Hobby Boss kit.
Cut masks deal with the frames and their edges, that is the part of the work that is the most laborious. The large surfaces of glazing between the frames are practical to cover additionally, either with a piece of ordinary masking tape or with masking fluid. You will save material and at the same time gain the certainty that no mist from the airbrush gets through the transparent part. Proceed by first sticking the cut masks on, then adding the covering of the remaining surfaces, and only then painting.
Before painting, run a fingernail or a toothpick along the edges of the masks, so that they sit down. At the boundary between the mask and the glass it is advisable to apply a thin coat of the interior color or of the base shade first: any paint creeping under is then not visible. Spray the camouflage shades only afterwards, again in thin coats.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
