Hawker Hurricane correct spine behind the headrest in 1:48 scale is a Quickboost resin correction part - an accurately shaped fuselage spine behind the pilot's headrest that will put the silhouette of your Hurricane right.
Responsibility details are not available.
A resin correction part from the Quickboost range of the Czech maker Aires for Hawker Hurricane kits in 1:48 scale. It replaces the area of the fuselage spine immediately behind the pilot's headrest with a more accurately shaped casting - and it is precisely this area, with its characteristic glazing and the transition into the spine, that kits tend to simplify while being clearly visible on a finished model.
The Hawker Hurricane was a British single-seat fighter that bore the main weight of the Battle of Britain in 1940 - it scored more kills than the more famous Spitfire. Its structure combined a tube frame fuselage with fabric covering on the rear section and metal wings. A characteristic feature of the type is the high fuselage spine flowing smoothly into the canopy, with a glazed area behind the pilot's head - which is exactly what this correction part deals with.
Wash the part in warm soapy water, separate it from the casting block with a fine saw and refine the joint with the fuselage by sanding - work with respiratory protection. Before fitting, we recommend trying the part dry as you go and filling any gap. Glue with super glue, then spray with primer so that the surface of the resin and plastic parts is even before the camouflage.
This is a correction accessory, not a model in its own right. It is supplied unpainted; the basic kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!