Víkendové slevy -20 %! | Weekend Sale – 20% OFF! | MASTER • KELIK • RESKIT • QUINTA STUDIO • EDUARD • GUNZE • VALLEJO

1:48 MiG-23MLD chaff/flare dispenser (covered)

The 1:48 MiG-23MLD chaff/flare dispenser (covered) accessory from the maker Aires brings a resin chaff and flare dispenser in the covered version for a model of the MiG-23MLD fighter in 1:48 scale. It is not an airplane model but a detail set.

Scale1:48
Manufacturer Aires
Product EAN8591111784160

Responsibility details are not available.

10.80 €
8.93 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

A chaff and flare dispenser for the MiG-23MLD in 1:48 scale

With this set Aires deals with one particular exterior detail of the airframe: the dispenser of decoys, that is the device for releasing chaff (dipole reflectors) and infrared flares. The set is listed in the covered version, where the block is enclosed by a cover. The cast part has sharper edges and cleaner transitions than plastic, which is clearly apparent on covers of a complicated shape on a fuselage. The package holds this detail alone; the MiG-23 kit itself has to be your own.

The real subject

The MiG-23 was a Soviet single-engined fighter with a variable-geometry wing, taken into service at the turn of the 1960s and 1970s. The MLD version was the last and most thoroughly developed single-seat fighter variant; compared with the older machines it received aerodynamic modifications improving its behavior at high angles of attack and modernized equipment. The means of passive defense, among which dispensers of decoys belong, appeared on the later versions in several executions, so the shape and placing of the block differed on individual machines.

Usage tips

Wash the casting in lukewarm water with dish soap and let it dry thoroughly. Cut the casting block off with a disc and level the seating surface wet so that the part seats on the fuselage with no gap. Try the fit dry before gluing and fill any gap with thin putty or a drop of super glue, followed by sanding down. Paint it together with the surrounding surface of the fuselage, so that both the shade and the sheen follow on. Accent the fine engraving around the cover with a thin wash and go over the edges carefully with a dry brush, so that the part does not look like a block stuck on.

Who the set is for

  • For builders of a model of the MiG-23MLD in 1:48 scale
  • For modelers who want exact exterior details of the airframe
  • For those who build a particular machine from a photograph
  • For collectors of airplanes with a variable-geometry wing

The accessory is supplied unpainted. The aircraft model, paints and glue are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The block of the dispenser is enclosed by a cover. On other machines and versions uncovered executions were used as well, which is why the manufacturer distinguishes the sets.

For releasing chaff (dipole reflectors) and infrared flares, that is for passive defense against both radar and infrared guidance.

It is not. The set holds only this detail; the base MiG-23MLD kit has to be your own.

As a rule yes, at least cleaning up the original shape and leveling the seating surface. Always try the part dry first.

Last seen

AiresAIR47831:48

1:48 MiG-23MLD chaff/flare dispenser (covered)

The 1:48 MiG-23MLD chaff/flare dispenser (covered) accessory from the maker Aires brings a resin chaff and flare dispenser in the covered version for a model of the MiG-23MLD fighter in 1:48 scale. It is not an airplane model but a detail set.
In stock
10.80 €
KAGEROKGR48005RS1:48

1:48 Mitsubishi A6M2 Model 21

A set of waterslide decals, Kagero 1:48 Mitsubishi A6M2 Zero Model 21 , for precise markings of the Japanese carrier fighter in 1:48 scale.
In stock
5.56 €
Special HobbySH723471:72

1:72 Mirage F.1 CR

An injection-molded plastic kit of the Mirage F.1CR in 1:72 scale from Special Hobby, the French reconnaissance fighter.
In stock
17.56 €
USCHI VAN DER ROSTENUVDR10121:35

1:35 Dusty Bootprint Decals US & GER

The Dusty Bootprint Decals US and GER decals in 1:35 scale from USCHI van der Rosten: dusty prints of the soles of American and German military boots for dioramas and vehicles. It is a finishing accessory, not a model.
In stock
11.56 €
1:350 North American B-25B Mitchell (Pre-painted)-25 %Stock ClearanceFavorite
TrumpeterTR064011:350

1:350 North American B-25B Mitchell (Pre-painted)

1:350 North American B-25B Mitchell (Pre-painted) is a set of small plastic aircraft from Trumpeter, supplied with the surface painted at the factory.
Last one!of 4
14.76 €11.08 € You save 3.68 €
New WareNWAM01421:72

1:72 Ryan L-17 A/B Navion BASIC kabuki masks

New Ware Ryan L-17 A/B Navion BASIC 1:72 are accurate self-adhesive painting masks for clean masking of the cockpit and the clear parts of a model.
In stock
2.76 €
AMMO of Mig JimenezA.MIG-7042

Erbsenmuster Pea Dot Camouflage Figures Set

A set of acrylics for the Erbsenmuster pea dot camouflage pattern of 1944: rust, olive and dark brown spots on a buff base.
In stock
15.96 €
Mr.PaintMRP373

CAMOULAGE GREY BS626

Mr.Paint Camouflage Grey BS626 is a pre-thinned paint on a lacquer base for the airbrush, in a 30 ml bottle.
In stock
5.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.