1:48 North-American T-28C/T-28D Trojan NAVY wheels set

1:48 North-American T-28C/T-28D Trojan NAVY wheels set

8.36 €
Add to Cart

1:48 North-American T-28C/T-28D Trojan NAVY wheels set

1:48 North American T-28C/T-28D Trojan NAVY wheels set is a resin set of wheels in the naval form for a model of the T-28 Trojan in the C and D versions. It is not a kit, but a landing gear accessory.

Scale1:48
Manufacturer Reskit
Product EAN8591111000000

Responsibility details are not available.

8.36 €
6.91 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Wheels set for the T-28C and T-28D Trojan, naval form, 1:48 scale

In this item Reskit offers a resin replacement for the wheels of a model of the North American T-28 Trojan trainer in the C and D versions. The set is intended for the naval type of wheel, which matters, because the same line also includes an item for land-based service. On a finished model the wheel is one of the few parts the viewer studies from close up, and the difference between a plastic part with a mold seam and a clean resin casting is visible at once.

The real subject

The T-28C was the naval training form of the Trojan modified for carrier landing training, while the T-28D came about as an armed conversion intended for light combat and reconnaissance duties in service abroad. Both versions come from the common basis of a piston-engined trainer with a radial engine and a roomy tandem cockpit, but they differ in equipment, which on a model can be matched by the corresponding landing gear details.

Building and painting tips

First be clear about whether you are building a machine with the naval or the land-based type of wheel, because the manufacturer offers both variants separately. Cut the castings off with a fine-toothed saw and level the bearing surface for the axle on abrasive paper laid on a flat support. Wash the set in lukewarm soapy water, let it dry thoroughly and spray it with primer, otherwise the paint will not hold on the smooth resin. Glue it with cyanoacrylate glue and work in small drops, because any excess is hard to remove from the engraved tread pattern of the tire. Leave the tire matte; the hub may have a slightly higher sheen, which will separate the two surfaces visually.

Who the set is for

  • builders of T-28 Trojan models in the C and D versions in 1:48 scale
  • modelers building a machine with the naval type of wheel
  • those interested in clean landing gear detail without traces of a mold seam
  • those with experience of resin and cyanoacrylate glue

The accessory is supplied unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

This item is intended for the naval type of wheel, the other one for land-based service. Choose according to the machine you are building.

Its name ties it to the C and D versions. For the A and B forms the same product line has a separate item.

Anyone who can cut a casting block off with a saw and sand it will manage. Cyanoacrylate glue is used, and it is better to sand wet so that no dust is raised.

Leave the tire matte and you can give the hub a slightly higher sheen. The difference in surface separates the two areas better than color alone.

Last seen

ReskitRS48-02081:48

1:48 North-American T-28C/T-28D Trojan NAVY wheels set

1:48 North American T-28C/T-28D Trojan NAVY wheels set is a resin set of wheels in the naval form for a model of the T-28 Trojan in the C and D versions. It is not a kit, but a landing gear accessory.
In stock
8.36 €
3DF3DF1032031:32

1:32 FuG 218 Neptun (3D print)

FuG 218 Neptun is a 3D printed resin set with the antenna array of the German airborne radar for models of night fighters in 1:32 scale.
In stock
10.76 €
AK interactiveAK11302

WWI FRENCH MILKY COFFEE – AFV

WWI French Milky Coffee is an acrylic modeling paint from the 3rd Generation line of the AK interactive brand, meant for the French camouflage scheme of combat equipment of the First World War.
In stock
2.76 €
EduardED64811521:48

1:48 S-199 4xETC 50 Rack With Bombs PRINT for Eduard

Eduard 1:48 S-199 4xETC 50 rack with bombs PRINT is a 3D printed resin set of four ETC 50 racks with bombs for a model of the Avia S-199 fighter in 1:48 scale. It is not an airplane kit but a detail accessory.
In stock
10.40 €
LifecolorLIFUA485

UA485 - US Army Uniforms ERDL Medium Green Matt

Lifecolor US Army Uniforms ERDL Medium Green is a matte water-thinnable acrylic paint in a 22 ml container for the brush and the airbrush alike.
In stock
2.76 €
Black Dog modelBDF350481:35

1:35 US soldier in Iraq N°1

1:35 US soldier in Iraq N°1 is a single figure of an American soldier from the Iraq deployment, the first of a pair of numbered figures in 1:35 scale.
In stock
14.36 €
ArmycastACM730531:72

1:72 Soviet White (Yellow) Outlined Red Stars - Early

Soviet White (Yellow) Outlined Red Stars — Early 1:72 is a set of self-adhesive masks for spraying Soviet stars with a white or yellow edging in the early variant. An accessory for painting, not a kit.
In stock
3.96 €
RB modelRB48P04

85mm L/52 ZiS-S-53 & D-5

85mm L/52 ZiS-S-53 and D-5 is a turned metal gun barrel from RB model reproducing the Soviet 85 mm tank guns.
In stock
6.76 €
Caracal ModelsCAD481711:48

1:48 FJ-2 Fury - Part 1

Decals in 1:48 scale for the North American FJ-2 Fury carrier fighter. The sheet brings seven marking variants, from two prototype airframes to machines of Marine Corps combat squadrons and a reserve unit.
In stock
15.96 €
OmaskOMK240551:48

1:48 Bf 109 F masks for crosses

Sharp outlines with no carrier membrane are what the set 1:48 Bf 109 F masks for crosses brings, cut for a model of the Messerschmitt of the F line.
In stock
7.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.