1:48 P-47D-30 Thunderbolt

Photo-etched metal accessories in 1:48 scale for a model of the P-47D-30 Thunderbolt fighter. The thin metal elements add details that injection-molded plastic only hints at in this scale.

Scale1:48
Manufacturer Eduard
Product EAN7591991248649

Responsibility details are not available.

9 €
7.44 € without VAT
2 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The P-47 Thunderbolt was among the heaviest single-engine fighters of the Second World War, and its rugged airframe took hard treatment at low altitude. The P-47D-30 version falls in the late part of the D series, which was built with a bubble canopy and gave the pilot all-round vision. Aircraft of this series flew as escort fighters and as fighter-bombers against ground targets.

What the set contains

The set brings photo-etched metal parts in 1:48 scale intended for detailing a P-47D-30 model. Etch delivers a thin edge, a tiny face or a mesh in a way injection-molded plastic cannot manage in this scale. The list of parts and the places they belong on the model are given in the manufacturer's instructions enclosed with the set.

Building and painting tips

Separate the elements with a sharp blade on a hard surface a little way from the part and sand the rest of the tab away. Make the bends in a photo-etch bender or between the jaws of flat tweezers, so that the edge stays straight. Cement for polystyrene does not hold on metal: use cyanoacrylate glue (super glue), or epoxy on larger surfaces. Wash and degrease the surfaces before painting and apply a thin coat of primer, or the paint will hold badly on smooth metal.

Who it is for

The set is aimed at a modeler who already builds with experience and wants to take a model further than the contents of the box allow. Working with etch calls for tweezers, a sharp blade and a steady hand. The contents of the delivery follow the manufacturer's data; a kit, paints and glue are not part of it, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The set is an accessory for a kit. What exactly the package contains is stated by the manufacturer.

Photo-etched sets are cut for a particular kit in the scale concerned, and that information is in the manufacturer's instructions. Before buying, check the 1:48 scale.

Cyanoacrylate glue (super glue), or epoxy on larger surfaces. Cement for polystyrene does not hold on metal, because it has nothing to soften.

Yes. Wash and degrease the surfaces and apply a thin coat of primer; the paint then holds considerably better on smooth metal.

Last seen

EduardFE14321:48

1:48 P-47D-30 Thunderbolt

Photo-etched metal accessories in 1:48 scale for a model of the P-47D-30 Thunderbolt fighter. The thin metal elements add details that injection-molded plastic only hints at in this scale.
In stock
9 €
EduardED4911081:48

1:48 Douglas SBD-1 Dauntless

An Eduard photo-etched set for the model of the Douglas SBD-1 Dauntless carrier dive bomber in 1:48 scale. The metal parts replace the places where plastic is necessarily thicker than the real thing.
In stock
23 €
ItaleriIT27881:48

1:48 A-1H SKYRAIDER

Injection-molded plastic kit of the Douglas A-1H Skyraider in 1:48 scale from Italeri: the American piston-engined attack aircraft.
In stock
27.56 €
PANZER ARTFI35-0351:35

1:35 Waffen-SS Normandy set

A set of figures, Normandy 1944, 1:35 scale is a resin set from the maker PANZER ART. It brings the figures offered singly as well into one scene in 1:35.
In stock
27.56 €
AiresAIR45381:48

1:48 J2M3 Raiden cockpit set

Aires – resin cockpit set for the J2M3 Raiden in 1:48 scale. A resin accessory to a plastic kit of the Japanese fighter.
In stock
16.80 €
1:32 B-17E/F bomb rack-25 %Stock ClearanceFavorite
EduardED328991:32

1:32 B-17E/F bomb rack

Eduard 1:32 B-17E/F bomb racks is a photo-etched detail set of bomb rack parts for the bomb bay of the B-17 Flying Fortress bomber in its E and F versions.
Last one!of 2
20.80 €15.60 € You save 5.20 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.