1:48 SAAB J-29B/J-29F Tunnan wheel bay

Aires resin wheel bays for the Saab J-29B and J-29F Tunnan in 1:48 scale replace the shallow bays from the kit with a detailed casting complete with inner structure. It is an accessory for a plastic kit, not an aircraft model.

Scale1:48
Manufacturer Aires
Product EAN1591111000044

Responsibility details are not available.

20.80 €
17.19 € without VAT
3 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Saab J-29B/J-29F Tunnan — resin wheel bays 1:48 (Aires)

The set is not an aircraft model but a detail accessory meant to be built into a plastic kit of the Saab J 29 Tunnan in 1:48 scale. Because of the shape of the molds, injection-molded plastic tends to leave the wheel bays shallow and smooth, whereas on the real aircraft this is a densely broken-up space with ribs, runs and units. The resin casting from Aires replaces that space with a finely detailed insert that is clearly visible once the model is finished.

The real subject

The Saab 29 Tunnan was a Swedish single-engine jet fighter with a swept wing, brought into service at the turn of the 1940s and 1950s. The engine, built under license in Sweden as the RM 2, was derived from the British de Havilland Ghost. The J 29B version was the fighter and attack variant with greater fuel capacity and pylons, while the later J 29F had an afterburner and a modified wing leading edge. The short, broadly spread fuselage gave the type the nickname Tunnan, meaning the barrel, and it also governed the layout of the nose landing gear.

Building and painting tips

Wash the parts in lukewarm water with detergent to remove any traces of mold release agent. Cut the casting blocks off with a saw or a cutting disc and level the face by sanding wet with respiratory protection. It is bonded with cyanoacrylate glue. The bays are fitted before the fuselage and the wing are joined, so dry-fit them and thin the surrounding plastic as needed. Painting is easier before installation: the base shade with an airbrush, a dark wash into the recesses and a light touch of dry brushing on the edges. Mask the finished bays before spraying the model further.

Who the set is for

  • Modelers who want to build the Tunnan with the landing gear down and the bays open
  • Builders who dislike the empty, shallow bays of plastic kits
  • Anyone interested in postwar Swedish aircraft in 1:48 scale
  • More experienced modelers working with resin and cyanoacrylate glue

The set is supplied unassembled and unpainted. The base kit, glue and paints are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

No. It is a detailed resin set of wheel bays that you build into a plastic kit of the Saab J 29 Tunnan in 1:48 scale. The kit has to be obtained separately.

Before the fuselage halves are joined and before the wing is cemented on. Later you can no longer get at their space.

It is bonded with cyanoacrylate glue. Always sand wet and with respiratory protection, as resin dust should not be inhaled.

Last seen

AiresAIR48791:48

1:48 SAAB J-29B/J-29F Tunnan wheel bay

Aires resin wheel bays for the Saab J-29B and J-29F Tunnan in 1:48 scale replace the shallow bays from the kit with a detailed casting complete with inner structure. It is an accessory for a plastic kit, not an aircraft model.
In stock
20.80 €
Red Fox StudioRFSQS-320601:32

1:32 F/A-18F Super Hornet (for Trumpeter kit)

1:32 F/A-18F Super Hornet is a set of 3D textured instrument panels from Red Fox Studio on decal paper for the two-seat cockpit of the model in 1:32 scale. Intended for Trumpeter kits.
In stock
29.56 €
AvisBX720201:72

1:72 de Havilland DH.60X RAF Gipsy Moth Coupe float plane

The de Havilland DH.60 Moth in the floatplane version is an injection-molded plastic kit of the British two-seat biplane in 1:72 scale from Avis.
In stock
17.56 €
TrumpeterTR003881:35

1:35 Spanish Army VRC-105 Centauro RCV

The Spanish Army VRC-105 Centauro RCV plastic kit (Trumpeter) in 1:35 scale, the Spanish wheeled version of the Centauro tank destroyer.
In stock
22.76 €
EduardED6722421:72

1:72 Martin B-26 Marauder engines

Eduard B-26 Marauder engines 1:72 is a Brassin resin set of two radial engines for models of the Martin B-26 Marauder.
In stock
19.80 €
RESArmRA48-060051:48

1:48 Embraer EMB 314 Super Tucano Additional fuel tanks

1:48 Embraer EMB 314 Super Tucano - additional fuel tanks are resin, 3D-printed carried tanks for models of the Brazilian turboprop aircraft Super Tucano.
In stock
7.56 €
OmaskOMK540531:48

1:48 Jak-9 (Yak-9) mask (for ICM)

Yak-9 painting masks 1:48 are a self-adhesive masking set for models of the Soviet Yak-9 fighter in 1:48 scale. They ensure accurate and sharp transitions when spraying the glazing. The set is prepared for the ICM kit.
In stock
5.56 €
1:48 HMMWV RT/II Sagged Wheel set (for Tamiya 1:48 )-25 %Stock ClearanceFavorite
DEF ModelDW480031:48

1:48 HMMWV RT/II Sagged Wheel set (for Tamiya 1:48 )

DEF Model resin replacement wheels in 1:48 scale for the HMMWV (Humvee) multi-purpose military vehicle in the RT/II version. A set with the weighted wheel effect for a faithful look to the model. Intended for the Tamiya kit.
Last one!of 2
13.96 €10.48 € You save 3.48 €
HaulerHLX480021:48

1:48 SHERMAN M4-fenders (TAMIYA)

Hauler 1:48 Sherman M4, fenders is a photo-etched set aimed exclusively at replacing the plastic fenders on the Tamiya kit. A metal fender has a thin edge and can be shaped.
In stock
17.16 €
OmaskOMK640161:48

1:48 P-40N Warhawk masks for control surfaces (for Eduard)

Omask 1:48 P-40N Warhawk — masks for the control surfaces are self-adhesive masking templates for accurately setting off and spraying the control surfaces of a model. It is not a model and not a structural accessory — it is an aid for painting the Eduard P-40N kit in 1:48 scale.
In stock
7.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.