1:48 UH-1C 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

1:48 UH-1C 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

10.36 €
Add to Cart

1:48 UH-1C 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

1:48 UH-1C - Small version is the smaller variant of the Quinta Studio set of three-dimensional colored decals for the interior of the UH-1C helicopter in 1:48 scale. Target kit: Hobby Boss.

Scale1:48
Manufacturer Quinta Studio
Product EAN5591111000009

Responsibility details are not available.

10.36 €
8.56 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Quinta Studio 1:48 UH-1C - 3D interior, smaller variant

The interior details are printed three-dimensionally and in color on decal paper and are stuck straight onto the parts of the kit. Instruments, panels and upholstery thus take on a raised look without having to be painted with a brush. This is the smaller variant of the set, marked in the name as the Small version; a full version of the same type is made as well, fuller in extent. The smaller variant is a simpler entry into the technique of three-dimensional interiors, and it suits when you want to improve chiefly what is most visible.

How the set is applied

The base has to be smooth, degreased and dry; spray it over with a dark base shade and draw gloss varnish over it, because the feature has no adhesive layer of its own and will not hold on a matte surface. Cut the feature out as close to the print as possible, dip it for about fifteen seconds in lukewarm water and let it rest until it starts to slide freely over the paper. Carry it onto the part whole, line it up and press it down with a soft cotton bud, so that no water stays under it. The film is thicker than with ordinary decals, so it stands more handling, but it gets into sharp corners less readily. Use neither softener nor setting solution; their chemistry attacks the printed resin and ruins the feature. Let the interior dry through thoroughly before the fuselage is closed up.

What to watch out for

The set is cut to measure for the Hobby Boss kit, so check before buying that it answers to the model you are building. Which particular parts of the interior the smaller variant covers is given on the package.

Who the set is for

  • builders of the UH-1C in 1:48 scale who only want to improve the most visible parts of the cabin
  • modelers looking for a simpler option for a three-dimensional interior
  • everyone who does not want to paint small instruments with a brush
  • more experienced builders used to exact work with decals

The package holds decals only. The model, paints and glue are not part of it.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

The smaller variant has a narrower extent. Check the exact difference in content on the packages of both sets.

Three-dimensional interiors are made to measure for one particular model, so check the match before buying.

With water, like decals. The base should be smooth, clean and drawn over with gloss varnish, on which the feature holds; no glue is used.

It is not. It is an accessory for a model, which you buy separately.

For the Hobby Boss kit in 1:48 scale. The base kit is not included in the package.

Last seen

Quinta StudioQDS482861:48

1:48 UH-1C 3D-Printed & coloured Interior on decal paper (HobbyBoss)(Small version)

1:48 UH-1C - Small version is the smaller variant of the Quinta Studio set of three-dimensional colored decals for the interior of the UH-1C helicopter in 1:48 scale. Target kit: Hobby Boss.
In stock
10.36 €
1 Man Army32DET0261:32

1:32 Focke-Wulf FW190 D-9

1:32 Focke-Wulf Fw 190 D-9 is a set of airbrush masks from 1 Man Army intended for painting a model, not an aircraft kit.
In stock
22.76 €
QuickwheelQW-0381:35

1:35 TYPE 1/2/3/4/97 Medium Tanks Fine Molds

The 1:35 Type 1/2/3/4/97 Medium Tanks wheel masking set is a sheet of pre-cut templates for separating the rubber tires from the disks of the road wheels. The set is cut for the kits from the manufacturer Fine Molds.
In stock
7.56 €
Black Dog modelBDF320051:32

1:32 German fighter pilot N°4 1914-1918

A figure of a German fighter pilot from the First World War in 1:32 scale, carried in the line as number four. It is supplied unpainted.
In stock
14.36 €
1:72 Martin B-26 Marauder upgrade set-25 %Stock ClearanceFavorite
EduardED727031:72

1:72 Martin B-26 Marauder upgrade set

1:72 Martin B-26 Marauder upgrade set is an Eduard photo-etched set for refining a plastic kit of the American bomber in 1:72 scale. It is an accessory to a kit, not a model of the aircraft.
2 leftof 5
19.80 €14.84 € You save 4.96 €
PANZER ARTRE35-0981:35

1:35 Panther/ Jagdpanther (Late Model) Idler Wheels

PANZER ART 1:35 idler wheels for the Panther/Jagdpanther (late model) are a resin aftermarket accessory – a set of rear idler wheels for models of the German tank Panther and the tank destroyer Jagdpanther.
In stock
5.56 €
SX-ArtSXA481891:48

1:48 Paint mask Mitsubishi F1M2 Type Zero (HAS)

A die-cut self-adhesive stencil for framing the glazing of the Japanese Mitsubishi F1M2 Type Zero observation floatplane. Cut to measure for the Hasegawa kit in 1:48 scale, a one-sided rendition for the outer surface.
In stock
4.76 €
IBG modelsIBG72U0951:72

1:72 Supermarine Spitfire Exhausts – Individual Type – 3d Printed Set

IBG models 1:72 Supermarine Spitfire - individual type exhausts is a 3D printed resin detail set of exhausts for a Spitfire model in 1:72 scale.
In stock
4.76 €
Titans HobbyTTH314

Cereal Field Type 14 (4 - 8 mm / 20 x 30 cm)

Titans Hobby Cereal Field Type 14 (4 - 8 mm) is a hand-made 20x30 cm grass mat imitating a grain field for dioramas.
In stock
15.56 €
Red Fox StudioRFSQS-320291:32

1:32 Supermarine Spitfire Mk.IXc (for Revell kit)

1:32 Supermarine Spitfire Mk.IXc is a 3D textured instrument panel from Red Fox Studio on decal paper, cut for the Revell kit in 1:32 scale. It is applied by soaking, like a decal.
In stock
11.56 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.