The gray scheme of the Ukrainian Su-27 in 1:48 scale as pre-cut shapes on two sheets.
Responsibility details are not available.
The gray scheme which appeared last on the heavy Ukrainian fighters recalls the coloring used on early American machines of the same category, but it is not identical to it. The tape used in the set is thin, pliable and semi-transparent, so the extensive fields can be assembled onto the long blended fuselage without creases. There are two sheets and they contain the shapes of the whole pattern. After spraying the mask comes off cleanly and with careful handling it will last for another use.
The Su-27 is a twin-engine heavy fighter aircraft designed for winning air superiority over a large space. You recognize it by the blended transition between the fuselage and the wing, the pair of vertical tail surfaces and the large air intakes under the center section. The Ukrainian Air Force took it over after the breakup of the Soviet Union and some of the airframes went through modifications and re-equipment. A uniform gray coat replaced the earlier more colorful camouflages and in it the machine comes across considerably less conspicuously.
The light and the darker fields differ from each other only slightly, so try the shades out on an offcut in advance. Lead the airbrush in thin layers, as otherwise the difference between the tones is lost under a build-up of paint. Lay the masks in pairs on both sides of the airframe, so that the pattern stays symmetrical, and press the edges down, so that paint does not run under the border.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!