Triple blocks 4 mm in size, the largest in this line. Ten 3D-printed pieces for the rigging of large sailing ships.
Responsibility details are not available.
Four millimeters is the upper limit of what the brand has in the triple version. In 1:72 such a piece corresponds to a block just under thirty centimeters long, and in 1:96 to almost forty. Both are convincing: on the large sailing ships of the nineteenth century the blocks at the mainmast really were this big, and they were clearly visible from the deck.
That is exactly why it pays to give attention to the surface at this size. On a finished model you can tell whether a block has wood grain suggested on it or has stayed smooth. Ten pieces in the set are enough for a whole group of halyards at one mast, or for both sides of a lighter yard.
The base is usually a medium ocher, over which a lighter tone is drybrushed in the direction of the grain. A dark wash then pulls the grain into the grooves. If you want to set the metal rim apart, dot it in with a graphite pencil; on a dark base it looks like worn iron.
The set makes up equipment for rigging and does not replace any part of the hull or the masts. In large scales it also pays to combine several dimensions at once, because a real ship never had all its blocks the same.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!