Top Studio 1.6 mm Resin Hose Joints (Large) are resin hose end fittings and joints in the Large size for detailed hose routing on models of motorcycles and cars.
Responsibility details are not available.
This Top Studio set contains small resin parts with which hoses on a model are terminated and connected. The figure of 1.6 mm in the name is the dimension of the part, not a scale; the set is therefore not tied to one particular scale but to the diameter of the hose used. The range includes smaller sizes as well, so it pays to choose the one that matches the routing on your model.
On a real machine a hose never ends cut off into empty space; it is always terminated with a fitting, a joint or a clamp. It is precisely this transition that a plastic kit usually does not address at all. The joints are slipped onto modeling hose and create a convincing termination of brake, fuel or coolant routing, or connect two hoses at a place where the routing changes direction. On a model of a motorcycle details like these are clearly visible, because the routing lies in an exposed part of the machine.
Choose a hose whose diameter matches the size of the joint; according to the configuration it may be necessary to widen the hole carefully with a micro drill bit in a hand drill. Bond with super glue applied with the tip of a toothpick, as an excess would flood a small part. Before painting, degrease the surface and use a base color. A metallic shade gives a faithful look, and on racing machines paints imitating anodized aluminum, that is, blue, red or gold, suit the job as well.
An accessory for building a model. Hoses, paints and glue are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!