An Artwox Model 1:700 wooden deck for a model of the battleship HMS Rodney replaces the engraved plastic deck with a thin veneer with pre-printed planks and a self-adhesive backing.
Responsibility details are not available.
An accessory for a ship kit, not a model on its own. The sheet is of thin wooden veneer with pre-printed plank laying, and the back carries an adhesive layer. It is glued onto the plastic deck of the kit, to whose shape it is cut. The set is cut for one particular kit, Trumpeter 06718, and we ask you to check the match before buying.
An engraved plastic deck has one substantial drawback, namely that all the planks are absolutely identical. The human eye detects such regularity as artificial at once. Wooden veneer, by contrast, has a natural pattern, growth rings and small differences of shade, so the area looks alive without any painting or weathering. It also has a real, if tiny, thickness, so a genuine step arises between the deck and the surrounding steel rather than just a painted line.
Before the work itself, set up a flat workplace and plenty of light from above, because the reflection shows where air has stayed under the veneer. Glue the deck in one sitting and with a steady hand. If the model already has the hull painted, bring the edge of the deck exactly up to the step and only then lower the area. Never force a bubble to the edge; instead lift the nearest corner, let the air out and put the area back. We recommend matte varnish at the end, which protects the veneer and matches the sheen to its surroundings.
This is an accessory for a plastic kit. The kit itself, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!