1:700 Scale PLAN Type 055 Destroyer Dalian

The PLAN Type 055 Destroyer Dalian is a kit of a modern Chinese large destroyer in 1:700 scale from the brand Sphyrna models.

Scale1:700
Manufacturer Sphyrna models
Product EAN8591111451536

Responsibility details are not available.

29.16 €
24.10 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Type 055, the destroyer Dalian 1:700, a kit from Sphyrna models

A kit of a large guided missile destroyer of the PLA Navy of the Type 055 class, specifically the unit bearing the name Dalian, in 1:700 scale from the manufacturer Sphyrna models. The model is supplied unassembled and unpainted. Check the particular contents of the package, the number of parts, the material of the parts and the presence of photo-etched parts and a stand on the box.

The real subject

The Type 055 is the largest surface combatant of the PLA Navy apart from aircraft carriers, and in Western terminology it is often described as a cruiser rather than a destroyer. Its hull is strongly shaped with a view to reducing radar return, the superstructure is integrated with planar radar antennas, and the main armament consists of a universal vertical launching system divided between the bow and the stern, which handles anti-aircraft as well as anti-ship and land-attack weapons. It is complemented by a gun turret on the bow, close-in defense systems and a hangar with a landing deck for a helicopter. The units of the class bear the names of Chinese cities and serve as escorts for carrier groups as well as independent command ships; today they are a symbol of the rapid technical development of the Chinese war fleet.

Building and painting tips

In 1:700 scale what decides is clean work. First decide whether you will build it on the waterline or with the whole hull on a stand, and proceed accordingly. Separate the small antennas, barrels and cranes with a sharp scalpel and glue them with a thin drop of super glue applied with a pin. It is practical to paint the deck separately from the hull and to join them only once they are dry. Brighten the gray finish with a graded lighter coat on the upper surfaces, so that the model does not look flat at a small scale, and bring out the panel lines and the edges of the decks with a fine wash. Railings and safety nets from photo-etched parts, if you obtain them separately, will markedly raise the result. Keep the weathering restrained, as a modern warship in active service tends to be well maintained.

Who the model is for

  • For collectors of modern warships in 1:700 scale
  • For anyone interested in the contemporary PLA Navy
  • For modelers who can handle work with very small parts
  • For a display case, where the silhouette of a modern surface ship stands out

The model is supplied unassembled and unpainted. Glue, paints and accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

Check the form of the hull and the contents of the package on the box before building; you will choose the way of displaying it accordingly.

In dimensions and armament the ship is above the usual category of destroyers, so some foreign sources place it among cruisers. The PLA Navy lists it as a large destroyer.

The 1:700 scale means very small parts and fine antennas. We recommend it to modelers who already have experience of small parts and of a sharp tool.

Last seen

Sphyrna modelsHTP70051:700

1:700 Scale PLAN Type 055 Destroyer Dalian

The PLAN Type 055 Destroyer Dalian is a kit of a modern Chinese large destroyer in 1:700 scale from the brand Sphyrna models.
In stock
29.16 €
EduardED6723991:72

1:72 Bf-109G-10 WNF engine

The Messerschmitt Bf 109G-10 (WNF) engine in 1:72 scale is a 3D-printed resin detail set from Eduard for a faithful rendering of the power plant and an open engine bay.
In stock
19.80 €
F-16D Block 40 LööK 1/48-25 %Stock ClearanceFavorite
EduardED6442291:48

F-16D Block 40 LööK 1/48

A set from the LööK range for the instrument panel of the two-seat F-16D Block 40 in 1:48 scale.
8 left
13.80 €10.36 € You save 3.44 €
MontexMXK321631:32

1:32 Bf 109E-3

Masking shapes for the angular cockpit of the Messerschmitt Bf 109E-3 in 1:32 scale. They cover the outer and the inner face of the glazing plus a pair of national insignia.
In stock
9.96 €
MontexMXSM722821:72

1:72 HP HARROW VALOM

Die-cut Montex painting masks in 1:72 scale for the British aircraft Handley Page Harrow. They make it easier to spray the glazing and the other divided areas of this prewar bomber precisely.
In stock
6.36 €
Aires/AerobonusAER4800481:48

1:48 Soviet weapons loading cart

The Soviet weapons loading cart 1:48 is a resin diorama accessory from Aerobonus. It is a ground support handling cart for loading armament, not an aircraft model.
In stock
9.20 €
MontexMXSM722681:72

1:72 BEAUFIGHTER TF.X

Masks for the extensive glazing of the Bristol Beaufighter TF Mk.X torpedo aircraft in 1:72 scale, cut to the parts of the kit by Airfix.
In stock
5.16 €
1:48 F-16A Plus interior-25 %Stock ClearanceFavorite
EduardED492761:48

1:48 F-16A Plus interior

A photo-etched set for detailing the cockpit of the F-16A aircraft in 1:48 scale. An accessory for a kit; the model itself is not part of the delivery.
5 left
13.80 €10.36 € You save 3.44 €
Atol HobbyATPE320021:32

1:32 Bf 109 scribing template

Atol Hobby 1:32 Bf 109 — photo-etched panel line template is not an airplane model, but an accurate metal aid for scribing and restoring panel lines on a Messerschmitt Bf 109 kit.
In stock
5.96 €
FujimiFU42249

Chibi-Maru Fleet Kongo

Chibi-Maru Fleet Kongo is a cute distorted kit of the Japanese battleship Kongo from Fujimi — shortened proportions, an easy and quick build with no conventional scale.
In stock
23.16 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.