1:700 USS Enterprise 1942 Painting Mask is a set of pre-cut masks with which the markings and color transitions on the CV-6 carrier are sprayed instead of decaled.
Responsibility details are not available.
The precisely cut masks are there so that the flight-deck markings and the boundaries of the color areas can be sprayed rather than covered over with a decal. A sprayed motif blends into the surface, has no glossy edge and no step, and it takes later weathering without the risk of a decal edge peeling away. The set is cut for the USS Enterprise 1942 carrier kit from the same brand.
The flight deck of an American carrier is a big flat area in 1:700 scale and every imperfectly laid decal shows on it. The long straight lines of the center line and the outlines of the elevators are also something a decal follows unwillingly. A mask gets around that problem and the result looks like sprayed paint, because that is what it is.
Spray the area with the lighter tone first and let it harden properly. Then move the mask across with tweezers, press it down with a soft stick and smooth the edges carefully. Apply the covering layer in several thin passes so that the paint does not creep under the edge. Lift the masks shortly after they dry, ideally while they are still warm.
The masks paint nothing by themselves, so count on getting the shades and the thinner separately. Remove any residue of the adhesive layer from the surface at once, before it dries.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!