29.–30. 10. z technických důvodů zavřeno. / Closed 29–30 October for technical reasons.

1:72 American helmet M1

The American helmet M1 in 1:72 scale is a small accessory for figures, not a model on its own. You put it on a figure's head or use it in a scene as set-aside equipment.

Scale1:72
Manufacturer Firma49
Product EAN8591111403160

Responsibility details are not available.

4.36 €
3.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The American helmet M1, 1:72 scale

This item is an accessory for figures in 1:72 scale — it is not a kit of a model. It contains a casting of the American steel helmet M1, that is one of the most widespread items of equipment that appears in modeling scenes. You will use the helmet on a figure's head, hung on equipment, laid on the seat of a vehicle or loose on the base of a diorama.

The real subject

The M1 helmet is in two parts: the outer steel shell has a smooth, slightly elongated shape with a turned edge, which runs all the way around and forms a low visor at the front. Inside sits a separate liner of pressed material with webbing fitting of its own, so soldiers wore either both parts together or the liner alone. The outer strap fastened under the chin, but often stayed hooked over the edge of the shell. The helmet was introduced at the beginning of the 1940s and with partial modifications served for several decades, so it is usable in scenes from a very wide period.

Fitting, cleaning up and painting

In 1:72 scale the part is very small, so work over a surface that will not lose anything. Separate the casting from the casting block with a sharp knife, level the surface left after the cut gently and try the fit dry. Glue resin parts with super glue — glue for plastic does not hold on them. Before painting, wash the casting in lukewarm water with a detergent. Apply as thin a layer of base coat as possible, because a thick layer would swallow the shape of the edge at this scale. A matte shade, a dark wash around the edge and a slight lightening of the crown are enough; finer shading will not be visible on such a small area anyway.

Who the set is for

  • Builders of dioramas with American infantry in 1:72 scale.
  • Converters of small-scale figures who lack the right helmet.
  • Modelers completing the interiors of vehicles with set-aside equipment.
  • Anyone who wants to raise the level of detail of figures in 1:72.

The accessory is supplied unpainted and without a figure. Paints, glue and further parts are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is an accessory for figures. The package contains the helmet alone in 1:72 scale; a figure is not included.

The real subject was introduced at the beginning of the 1940s and with partial modifications served for several decades, so it covers a wide period.

It is small but manageable. Work over a surface, cut with a sharp knife and apply the paint in the thinnest layers possible, so that the shape of the edge is not lost.

Check the number of pieces on the packaging.

Last seen

Firma4949H009/721:72

1:72 American helmet M1

The American helmet M1 in 1:72 scale is a small accessory for figures, not a model on its own. You put it on a figure's head or use it in a scene as set-aside equipment.
In stock
4.36 €
HGWHGW1320291:32

1:32 LVG C.VI + Decal

The photo-etched detail set HGW 1:32 LVG C.VI with a decal sheet adds to a large-scale model of the German reconnaissance biplane the fine metal parts that injection-molded plastic cannot manage.
In stock
8.40 €
ReviREVI079

Časopis Revi č.79

Revi magazine issue 79 is a printed Czech periodical about aviation history. It is not a model or a kit but a magazine with articles and photographs of aircraft and airmen.
In stock
4.76 €
PeewitPWM720371:72

1:72 B5N2 Kate - pro modely Airfix 2015

Peewit B5N2 Kate 1:72 are precise self-adhesive painting masks for clean masking of the canopy glazing and the wheels of this Japanese torpedo aircraft.
In stock
5.16 €
1:35 Messerschmitt Bf-109G-6-25 %Stock ClearanceFavorite
EduardED329991:35

1:35 Messerschmitt Bf-109G-6

A set of photo-etched parts in 1:35 for a model of the German Messerschmitt Bf 109G-6 fighter. Metal sheet replaces detail that plastic cannot carry.
Last one!of 2
23 €17.24 € You save 5.76 €
HatakaHTK-A069

Woodland Desert Sage

A modeling paint in the Woodland Desert Sage shade, code HTK-A069.
In stock
1.16 €
AiresAIR48541:48

1:48 F-104C Starfighter cockpit set

A complete resin cockpit for models of the F-104C Starfighter in 1:48 scale with photo-etched parts.
In stock
20.80 €
AiresAIR41471:48

1:48 A-7E Corsiar II cockpit set

The A-7E Corsair II cockpit set 1:48 is a resin cockpit set from Aires for the American carrier-based attack aircraft. The accessory raises the detail of a plastic kit; it is not a standalone airplane model.
In stock
20.80 €
PlusmodelPMO559

Olověné drátky půlkulaté 0,6 mm

Plusmodel half-round lead wire 0.6 mm is lead wire with a half-round section (0.6 mm) and a flat underside, which beds down well onto the surface of a model.
In stock
4.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.