20% OFF SELECTED BRANDS! EDUARD, KINETIC, SPECIAL HOBBY, CMK & more

1:72 B-1B Lancer. Air intakes

Air intakes 1:72 B-1B Lancer are a detail accessory for a kit — they make the shape and the depth of the engine intakes more accurate; this is not a model of the aircraft.

Scale1:72
Manufacturer Mettalic Details
Product EAN8591111000000

Responsibility details are not available.

18.76 €
15.50 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Air intakes for a model of the B-1B Lancer in 1:72 scale

An accessory of the Metallic Details brand which on a model of the B-1B strategic bomber in 1:72 scale replaces the plastic air intakes to the engines. The aim is the correct shape of the leading frame and above all the depth of the duct: on an injection-molded kit the intake tends to be no more than a shallow blind hole, into which the wall of the nacelle is visible when looking from the front. The product is not a kit; the model is obtained separately.

The real subject

The B-1B Lancer is an American strategic bomber with a variable-geometry wing and four engines housed in pairs in nacelles under the center section. Against the older version designed for high speeds, the B variant was given revised intakes with a curved duct, so as to reduce radar reflection from the rotating parts of the engine. The shape of the intake is therefore not a merely cosmetic matter on a model but a recognition feature of the particular version — and when looking from the front it is the first thing a viewer notices.

Fitting and painting tips

This accessory is fitted early, not at the end of the build. Still before the nacelles are closed, try out dry how much plastic has to be taken off, so that the part sits on the axis and does not stand out of the outline. Wash the casting in lukewarm water with dish soap beforehand and let it dry. Paint the inside of the duct before you close it — once glued together you will not reach inside with a brush. The intakes tend to be light inside, so white or a very light gray with fine dirt at the edge proves itself. Fill the joint between the accessory and the plastic and sand it smooth, or a visible gap will be left at the leading edge; sand wet and with respiratory protection. Glue with superglue and let the finished assembly cure with no stress.

Who the set is for

  • builders of large American bombers in 1:72 scale
  • modelers who are bothered by a shallow blind air intake out of a mold
  • anyone interested in the exact shape of a particular version of the airframe
  • more advanced modelers willing to work on the nacelles before closing them

The set is an accessory to a plastic kit, which it does not hold. Paints, glue and other accessories are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

You do not. This is a detail accessory to a kit of the B-1B in 1:72 scale, which you buy separately.

Early, still before the engine nacelles are closed. Once they are glued together you will reach inside with neither glue nor a brush.

White or a very light gray with fine dirt at the edge is usually used. Paint before the duct is closed.

Reckon on it. It pays to fill the joint of the accessory and the plastic at the leading edge and sand it wet, or the gap will stay visible.

Last seen

Mettalic DetailsMDR72371:72

1:72 B-1B Lancer. Air intakes

Air intakes 1:72 B-1B Lancer are a detail accessory for a kit — they make the shape and the depth of the engine intakes more accurate; this is not a model of the aircraft.
In stock
18.76 €
Pelikán4SH0032

Jetfire Twin Packs

The Jetfire Twin Packs hand-launched glider from the Pelikan brand is a simple unpowered glider that, according to its name, comes in a pack of two. It is not a plastic display model.
In stock
6.36 €
Hobby BossHB817701:48

1:48 MiG-31BM. w/KH-47M2

An injection-molded plastic kit of the MiG-31BM with the Kh-47M2 (Kinzhal) missile in 1:48 scale from Hobby Boss — the Russian heavy supersonic interceptor with a hypersonic missile.
In stock
57.16 €
1:35 Pz.Kpfw.II Ausf.F
-20 %
Favorite
EduardED364771:35

1:35 Pz.Kpfw.II Ausf.F

Eduard 1:35 Pz.Kpfw.II Ausf.F is a photo-etched detail set for a model of the German light tank in 1:35 scale. It is not a kit but an accessory with which a model is equipped with fine parts.
In stock
11.80 €9.44 € You save 2.36 €
HatakaHTK-A212

Earth Yellow (FS30257)

Hataka Earth Yellow (FS30257) is an acrylic modeling paint in an earthy yellow shade according to the FS 30257 standard, optimized for an airbrush.
In stock
1.16 €
Dead DesignVM320601:32

1:32 Aichi D3A Val (Closed Canopy)

1:32 Aichi D3A Val (Closed Canopy) is a canopy mask set from Dead Design, cut for the closed position of the long canopy of the carrier dive bomber.
In stock
9.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.