1:72 Chengdu F-7 EXPERT Kabuki Masks represent the full extent of masking for the kit from Kovozavody Prostejov, completed with the inner sides of the glazing and further details.
Responsibility details are not available.
The EXPERT level goes the furthest of the whole trio. To the outer framing, the clear parts and the wheels it adds masks for the inner side of the glazing and for the tiny areas that are otherwise hard to cover. A modeler is thereby able to tell the shade of the frames from inside apart from the color of the fuselage with no need to cut anything. The parts are cut for the Chengdu F-7 kit from Kovozavody Prostejov.
The light supersonic machine with a delta wing became an affordable entry ticket into the ranks of supersonic operators for a number of smaller air forces. It was made for decades and in many countries it replaced older subsonic fighters; some pieces served as trainers and light attack aircraft long after the end of the Cold War. Thanks to that the type has an unusually wide register of color schemes, from bare metal to desert camouflage.
Stick the inner masks on before the cockpit is assembled; afterward the glass is hard to reach. It also pays off to cover the opening of the cockpit with masking fluid or paper, so that the mist from the airbrush does not get inside. Do the removal with a blunt tip; a sharp point easily scratches a soft casting. Put the tiny cutouts aside onto dark paper; on a light surface they get lost and are then hard to find.
In the box you will find exclusively the sheets with the masks; nothing else is enclosed with them.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!