Masks for spraying the national insignia and the stripes on the vertical tail in the early rendition, for a Hawker Hurricane model in 1:72 scale.
Responsibility details are not available.
The Hawker Hurricane is a British single-seat fighter of the Second World War. Unlike its all-metal rivals, its fuselage was built on a lattice frame with a covering, which can be told from its rounder, less smooth surface. It is precisely on such a surface that a classic decal gives trouble: the film breaks on a broken-up area and the edge silvers.
Masks for spraying the national insignia and the stripes on the vertical tail in the early rendition. The insignia is therefore not stuck on but sprayed, and becomes part of the layer of paint. The result has no glossy edge, it does not crease over rivets and, when worn, it can be rubbed back or sanded just like the surrounding varnish.
The masks are stuck onto a finished, dried and degreased paint job, that is before the color of the insignia is sprayed. Press the edges carefully so that the paint does not run under them, and spray the area in several thin coats perpendicular to the mask. A multicolored circle is built up in layers, each color sprayed separately; deal with the order and the placement according to the instructions for the set. Remove a mask shortly after the paint has set, not after it has fully cured, or you will lift the edge of the paintwork with it. Lift a corner of the mask with the tip of a blade and take it off diagonally across the area.
For modelers who want insignia without film and do not want to fight the silvering of decals. Working with masks calls for an airbrush and a little patience during removal. The kit, paints and varnish are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!