1:72 MiG-23UB in Polish AF service

1:72 MiG-23UB in Polish Air Force service decals from the brand KARAYA are a standalone sheet of water-slide decals for a model of the two-seat trainer version of the MiG-23 fighter. It is not a kit but an accessory for a model.

Scale1:72
Manufacturer KARAYA
Product EAN8591111783599

Responsibility details are not available.

5.56 €
4.60 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

1:72 MiG-23UB in Polish Air Force service decals (KARAYA)

A sheet of water-slide decals in 1:72 scale for marking a finished model of the two-seat trainer version MiG-23UB in Polish Air Force markings. It is an accessory for a model, not a kit: the model of the aircraft itself, the paints, the varnish and a decal softener are not included in the package. The decals are released from the backing paper after a short soak in lukewarm water.

The real subject

The MiG-23 is a single-engine fighter with a variable-sweep wing that is set in flight into several positions according to the speed and the phase of flight. The UB version is the two-seat trainer and combat trainer variant with tandem cockpits: the instructor sits at the rear and a retractable periscope above the rear canopy improves his forward view. Because of the second cockpit the aircraft has a slightly different shape of spine from the single-seat versions. The Polish Air Force operated machines of the MiG-23 family from the end of the 1970s to the end of the 1990s, and the trainer version accompanied the combat machines in its inventory throughout their service.

Applying the decals

The 1:72 scale means small elements that are easily folded or broken, so work with smooth-tipped tweezers and over a surface on which even a small piece of film is visible. The base has to be smooth and glossy, otherwise a silvery veil is left around the decal. Cut the subject out close to the printing, soak it for ten to thirty seconds in lukewarm water and let it rest until it floats freely on the paper. Settle it on a drop of water, line it up and press the excess out with a soft brush from the center to the edges. Apply the decal softener only onto a positioned decal and let it work without touching it; the film will draw itself into the engraved lines, over the outlines of the cockpit and over the movable parts of the wing. Once dry, seal everything with a clear coat, which hides the edges of the film and prepares the surface for weathering.

Who the set is for

  • modelers building combat aircraft in 1:72 scale
  • anyone interested in the hardware of European air forces of the Cold War
  • builders of two-seat trainer versions, which boxes tend to neglect
  • collectors who want a paired trainer aircraft in a display case alongside a single-seater

This is a standalone decal sheet, not a kit. The model of the aircraft, paints, varnish and a decal softener are not included in the package, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It is not. It is only a decal sheet. The kit of the MiG-23UB in 1:72 scale, paints and varnish have to be bought separately.

It has two tandem cockpits, a slightly different shape of spine and a retractable periscope for the instructor in the rear cockpit.

Use smooth-tipped tweezers, cut close to the printing and slide the decal off the paper straight onto a drop of water on the model, so that it does not fold.

Apply a decal softener and let it work without interfering. The film wrinkles temporarily, but while drying it draws itself into the relief. Touching it at that moment means damaging it permanently.

Last seen

KARAYAKARD72101:72

1:72 MiG-23UB in Polish AF service

1:72 MiG-23UB in Polish Air Force service decals from the brand KARAYA are a standalone sheet of water-slide decals for a model of the two-seat trainer version of the MiG-23 fighter. It is not a kit but an accessory for a model.
In stock
5.56 €
1:48 B-26B Marauder bomb bay-25 %Stock ClearanceFavorite
EduardED4811451:48

1:48 B-26B Marauder bomb bay

Eduard 1:48 B-26B Marauder bomb bay is a full photo-etched set for the bomb bay of the American Martin B-26B Marauder medium bomber in 1:48 scale.
Last one!of 2
20.80 €15.60 € You save 5.20 €
VallejoVAL77107

True Metallic Metal LiGHT - Crimson Magenta

Crimson Magenta in the light grade of the True Metallic Metal metallic system: a purple metal with a pink cast for sheens and transitions.
In stock
3.96 €
Voyager ModelPE359691:35

1:35 WWII German Bergepanther Ausf.A (Early type,Panther A tool holders) Basic(For MENG SS-015)

The basic Voyager Model 1:35 photo-etched set for the Bergepanther Ausf.A recovery vehicle in the early configuration with Panther Ausf.A type tool holders is an accessory, not a model. The brass photo-etched parts are meant for the Meng SS-015 plastic kit you already own.
In stock
31.56 €
Special HobbyF484081:48

1:48 WWII British CW Tank Commander / Half Figure

The British tank commander, half figure is a resin figure in 1:48 scale intended for the open hatch of British and Allied tanks of the Second World War.
In stock
8.36 €
BroncoFB40101:48

1:48 North American P-51D/K Mustang

The Bronco 1:48 North American P-51D and P-51K Mustang plastic kit is an unassembled model of the American fighter aircraft from the period of the Second World War.
In stock
21.96 €
Firma4949T048/721:72

1:72 Wheels for Tractor SLT-56 - (TAKOM 5011)

Wheels for the SLT-56 tractor in 1:72 scale are replacement parts that take the place of the box wheels on the finished model. Intended for the Takom 5011 kit.
In stock
7.16 €
AML DecalsAMLM730011:72

1:72 Lavochkin La-5F/FN /AML

Lavochkin La-5F/FN painting mask, 1:72 from AML for spraying the camouflage of the Soviet fighter faithfully.
In stock
1.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.