1:72 RWD 8 DWL

A model of the Polish trainer and liaison airplane RWD-8 in its DWL form, in 1:72 scale.

Scale1:72
Manufacturer Plastyk
Product EAN8591111026352

Responsibility details are not available.

3.56 €
2.94 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

The real subject

The RWD-8 was a Polish two-seat trainer and liaison airplane from the first half of the 1930s. It carries its wing above the fuselage on struts, so the crew has an almost unobstructed view downward from the open cockpits, the landing gear is fixed and the airframe is largely covered with fabric. It was exactly this simplicity that made it one of the most numerously built Polish airplanes of the interwar period: it flew with the Polish Air Force as a school machine and in civilian flying clubs.

What the DWL designation means

The type was produced in two production series at two different works, and the series differed in small things. The DWL qualifier in the name sets one of them apart. For the build this is not a trivial detail: the choice of finish and markings follows the series too, so it is worth looking into the enclosed instructions before you reach for the paints.

Building and painting tips

A high-wing monoplane with struts stands or falls on how precisely you seat the wing. It is worth building a simple prop out of offcuts, which will hold the wing at the right height and angle until the glue sets, and fitting the struts only afterwards. Fabric covering shows on a model as a slight sag between the ribs; when painting you bring it out with a darker tone run along the ribs, otherwise the surface stays flat. The extent of the kit, the number of parts and the finishes offered are given in the enclosed instructions.

  • a model of the RWD-8 airplane in 1:72 scale
  • the DWL form, that is one of the production series of the type
  • the subject is a two-seat high-wing monoplane with fixed landing gear
  • the extent of the kit and the finishes are given in the enclosed instructions
  • a rewarding subject for builders of interwar machines

Terms of supply

Paints, glue and tools are not part of the delivery, unless stated otherwise.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

A Polish two-seat trainer and liaison high-wing monoplane of the 1930s with fixed landing gear and fabric covering, used by the Polish Air Force and by flying clubs alike.

It sets one of the two production series of the type apart. The series differed in small things and in the finishes offered.

The seating of the wing carried above the fuselage. Prop it at the right height and angle before the glue sets and fit the struts only afterwards.

They are not. Paints, glue and tools are not part of the delivery, unless stated otherwise.

Last seen

PlastykPLS0641:72

1:72 RWD 8 DWL

A model of the Polish trainer and liaison airplane RWD-8 in its DWL form, in 1:72 scale.
In stock
3.56 €
LACILAC1440701:144

1:144 P&W JT8D-7B B727 AIRFIX

LACI 1:144 Pratt & Whitney JT8D-7B for the Boeing 727 is a resin set of powerplants for a model of the three-engine Boeing 727. It is an accessory to the Airfix plastic kit, not a stand-alone model.
In stock
17.56 €
AberABR35L2041:35

1:35 Soviet 122mm M-30 barrel for SELF-PROPELLED GUN SU-122

A turned barrel for the 122 mm M-30 howitzer of the Soviet SU-122 self-propelled gun in 1:35 scale from Aber. A metal replacement for the plastic barrel, hollow muzzle included.
In stock
9.16 €
KelikRSK48-00081:48

1:48 TBD-1A DOUGLAS INTERIOR 3D DECALS FOR GREAT WALL HOBBY KIT

Kelik TBD-1A Douglas Devastator - 3D interior decals (1:48) is a set of raised color decals for the cockpit of this American carrier-based torpedo bomber. An accessory for the corresponding plastic model, not a kit. The sheet is prepared for the Great Wall Hobby kit.
In stock
12.76 €
VallejoVAL26003

Pipettes Medium 3ml 8 Pack

Pipettes Medium 3 ml is a set of 8 plastic pipettes from Vallejo with a capacity of 3 ml. It is not a paint , it is an aid for the precise dosing of paints, thinners and washes.
In stock
2.76 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.