1:72 Short Sunderland Mk.V Canopy airbrush mask for Special Hobby

1:72 Short Sunderland Mk.V Canopy airbrush mask for Special Hobby

1:72 Short Sunderland Mk.V Canopy airbrush mask for Special Hobby

A masking set for the glazing of the Short Sunderland Mk.V in 1:72 scale deals with the extensive glazing of the pilot's cabin and the fuselage windows of this four-engine flying boat. The target kit is Special Hobby.

Scale1:72
Manufacturer MH models
Product EAN8591111000000

Responsibility details are not available.

6 €
4.96 € without VAT
1 pcs in stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Glazing masks for the Short Sunderland Mk.V 1:72 from MH models

Pre-cut masking templates for the glazed areas of a model of the British Short Sunderland Mk.V flying boat in 1:72 scale. For a modeler this type is among the most demanding to mask, because besides the pilot's cabin it also has a row of fuselage windows and the glazing of the gun positions. Cutting that many frames by hand means hours of work and almost certainly unequal widths. Pre-cut masks follow the shape and all you have to do is transfer them, press them down and spray over them. The masks are punched to the shape of the Special Hobby kit.

The real subject

The Sunderland was a British four-engine flying boat intended for long-range patrol flights over the sea. The Mk.V version came about by replacing the original engines with American radial units, which brought greater power and reliability on long flights at full load. Inside the roomy two-deck hull the crew took turns during flights lasting many hours, which is matched by the number of windows along the sides. It is those that make the glazing of a model a discipline in its own right.

Procedure and recommendations

Clean the glazing and lay the masks on dry, so that you know where each piece belongs. Work systematically along one side of the fuselage so that the small templates do not get mixed up. Press the edges down with a blunt tool. It is advisable to spray the frames with the interior color first and only then with the external camouflage. Spray in thin coats and take the masks off shortly after the paint has set, not after the finish has fully cured.

Who the set is for

  • Builders of large models of flying boats in 1:72 scale.
  • Modelers who do not want to spend an evening cutting tape.
  • Those who want a frame of equal width and straight edges on every window.

This is an accessory for a build, not a model. The kit and paints are not included in the package.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

It does not. This set is focused on the glazing, and the roundel masks and the markings masks are sold separately.

Work systematically along one side of the fuselage and lay the masks on dry first, so that you know where each piece belongs.

Yes, the recommended procedure is the interior color first and only then the external camouflage.

Last seen

MH modelsMHX720321:72

1:72 Short Sunderland Mk.V Canopy airbrush mask for Special Hobby

A masking set for the glazing of the Short Sunderland Mk.V in 1:72 scale deals with the extensive glazing of the pilot's cabin and the fuselage windows of this four-engine flying boat. The target kit is Special Hobby.
In stock
6 €
Voyager ModelPEA4061:35

1:35 WWII British Grant Medium Tank Track Covers(For TAKOM 2086)

Grant – track covers in 1:35 scale are a photo-etched add-on set for a plastic kit of the medium tank you already own, not a standalone model. The brass parts replace the coarse plastic fenders above the tracks. The set is cut for the Takom 2086 kit.
In stock
14.76 €
KelikKS480341:48

1:48 Israel Roundel - Acrylic 3mm (240x240mm) (190g)

A display plaque with the Israeli roundel 1:48 is a printed acrylic board on which you can stand a finished model to good effect.
In stock
20.76 €
Special HobbySH723391:72

1:72 DH100 Vampire Mk.I 'The First Jet Guardians of Neutrality'

Special Hobby 1:72 DH.100 Vampire Mk.I is an injection-molded plastic kit of the early British jet fighter in the service of neutral countries.
In stock
18.36 €
BelkitsBEL-DEC0111:24

1:24 Carbon Twill Weave (Belkits-Cartograf)

Carbon Twill Weave waterslide decal 1:24 from Belkits is a decal sheet with a faithful carbon fiber pattern in a diagonal weave for the bodies of car models. It is not a paint and not a kit.
In stock
12.36 €
1:35 M4 SHERMAN T-48 type workable tracks (3D printed)-25 %Stock ClearanceFavorite
RYE FIELD MODELRM30301:35

1:35 M4 SHERMAN T-48 type workable tracks (3D printed)

Workable T-48 type tracks for American M4 Sherman medium tanks in 1:35, made by 3D printing.
5 leftof 6
35.96 €26.96 € You save 9 €
Quinta StudioQD+351841:35

1:35 JGSDF Light truck Mitsubishi Type 73 Shin 3D-Printed & coloured Interior on decal paper (Trumpeter) (with 3D-printed resin parts)

Quinta Studio — the 3D-printed colored interior for the JGSDF Mitsubishi Type 73 Shin light truck (1:35, for the Trumpeter kit) is a set of pre-painted 3D-printed cab parts on backing decal paper, with resin parts added. You apply it like a decal, but it has real three-dimensional relief.
In stock
20.76 €
ReskitRSU48-03581:48

1:48 MiG-25 Ventral Fuel Tank (5280 Litre) (3D Printed)

Reskit 1:48 MiG-25 ventral fuel tank (5280 liters) is a resin, 3D-printed accessory. An accurate ventral tank for superdetailing a model.
In stock
17.56 €
ItaleriIT39641:24

1:24 Iveco TURBOSTAR 190.48 reefer truck

The Iveco TurboStar 190.48 is a plastic kit of the Italian semi-trailer tractor with a refrigerated semi-trailer in the large 1:24 scale from Italeri.
In stock
59.56 €
TakomTKM22221:35

1:35 PLA ZTZ 100

An injection-molded plastic kit of the PLA ZTZ-100 in 1:35 scale from Takom - the modern Chinese main battle tank in service with the People's Liberation Army (PLA).
In stock
23.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.