A rectangular melt head of 2.0 mm is the middle size of interchangeable tip for a heated pen; the shape and the dimension are given in the name of the item.
Responsibility details are not available.
Between fine and coarse work lies the dimension that is used most often. The name of the item determines a rectangular cross section and a value of 2.0 mm, that is a tip usable for most of the operations a builder thinks up when working with heat. The mark is strong enough to be visible after painting, and yet not so large that it overpowers the surrounding detail.
The best results come from an even movement without stopping; where the tip stands still, a deeper pit arises and the line loses its flow. It pays to turn the part so that the hand pulls toward the body, because a pushed movement is harder to control. Judge a finished place under side lighting; only the shadow shows whether the depth is even. Anyone who works with this dimension regularly soon gains a feel for the moment when the plastic gives way, and the other profiles then only refine the result.
For modelers who want to manage most damage and textures on equipment in ordinary scales with a single tip. Fit and change tips when cold, a hot tip is held badly and a burn is a matter of a fraction of a second. Neither the material used nor the way it is clamped is captured in the name of the item, so check them against your own device.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!