A triangular melt head of 3.0 mm is the interchangeable tip of a heated tool that leaves a wedge-shaped mark with a pointed bottom.
Responsibility details are not available.
A wedge cross section behaves differently from a flat one. The mark narrows toward the bottom into a point, so it looks like a tear or a seam, not like a pit. The name of the item determines a triangular shape and a value of 3.0 mm, that is a tip for stronger interventions where it is to be apparent at first glance that the material gave way along one line.
A wedge bites into material more easily than a flat face, so watch the depth more carefully. Pulling creates a continuous seam, short touches a row of jagged scratches that serve well on weathered wood. Choose the direction of the stroke along the grain or along a panel, because a crosswise mark catches the eye and looks out of place. Between strokes leave the tip out of the material for a moment, so that the mark does not start widening to the sides more than you intended.
For builders of scenes with wood, crates and damaged structures and for everyone who wants to create a sharp seam instead of a pit. Wait for the tip to cool before changing it, and set it aside from the work in progress. Which device the tip belongs in and what it is made of is not given in the name of the item, so check the holder beforehand.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!