Reskit access ladders for the Republic F-105F and F-105G Thunderchief in 1:72 scale are a resin 3D printed accessory (2 pieces).
Responsibility details are not available.
A pair of resin 3D printed access (boarding) ladders for the two-seat F-105F and F-105G Thunderchief versions. The fine printing manages thin rungs and side rails even in the small 1:72 scale. The package contains 2 pieces.
It is not an aircraft model but a scenic and detail accessory. The ladders bring a standing model and an airfield diorama to life and give a scene realistic scale and content.
Release the thin parts from their supports carefully, wash the print resin residue off them and glue them with cyanoacrylate glue. A primer and matte metallic or gray shades are recommended; bring the edges out with a dry brush.
It is supplied unpainted, as a resin 3D printed accessory. The paints, the glue and the base model are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
