A bleed screw of a brake system in the bare version, with no cap fitted. A metal detail for calipers and master cylinders.
Responsibility details are not available.
This variant shows the bleed screw as it looks without its protective rubber cover: a slim hollow spigot with a hexagonal base and an open mouth at the top. On a real machine it gets into that state every time the brakes are bled, and on racing machines outside servicing too, because the cap is the first thing to get lost.
It makes sense on models in a servicing scene, on machines with a bent hose fitted to the mouth, and on circuit specials, where nobody bothers with protection. On a polished machine from the showroom, by contrast, the cap is called for and the other variant suits. The difference between the two forms is small, but it is precisely such small things that separate a model that merely resembles something from a model somebody observed.
Bring out the open mouth by pushing a sharpened point loaded with dark paint into it after varnishing. A shadow is created that gives the impression of a real cavity, even though the part is solid. Without this step even a well-machined spigot looks like an ordinary pin under light.
If you are building a scene with servicing in progress, fit a piece of thin wire covered with a clear sleeve to the mouth and lead the other end into a container under the machine. Such a scene will explain the function of the part to the viewer better than any caption.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!