Bolt Thick (vteřinové lepidlo husté) 7,1g

BOLT Bolt Thick 7.1 g

A thick super glue based on cyanoacrylate (CA) from the manufacturer BOLT with high viscosity. The thick consistency neither runs nor wicks into seams, it holds where you put it and it can fill even larger gaps between surfaces that do not sit together perfectly. The higher viscosity also gives more time to line the parts up accurately before the joint cures. It is the choice for joints that are not tight, or for parts which have to be aligned for a while. The package contains 7.1 g.

Use

• Put a drop of the thick glue on one of the parts, offer the second part up and hold it until the joint cures.
• It suits larger gaps and irregularities where the parts do not sit together perfectly — the glue fills the gap and does not run.
• The high viscosity gives more time to line the parts up than the thin or the medium variant.
• For very tight, accurately fitting joints, where the glue is meant to wick into the seam by itself, the thin variant is more suitable.
• Work in a well-ventilated area; curing can be speeded up with an activator for CA glues.

Who it is for

For modelers who need to fill larger gaps and to have more time to align parts. A thick glue will be appreciated everywhere thin CA would run or spread further than is wanted. A practical volume of 7.1 g.

Cyanoacrylate bonds skin and eyes instantly. Work carefully, in a well-ventilated area, and prevent contact with the skin and the eyes. Keep out of the reach of children and store it cool.