370 gallon wing tanks with pylons (type 1) for the F-16 (2 pieces) are a resin 3D printed set for experienced modelers in 1:72 scale.
Responsibility details are not available.
A resin and 3D printed accessory set for experienced modelers. It is not a model of an aircraft but a pair of 370 gallon wing drop tanks together with pylons in the type 1 variant, for kits of the F-16 fighter in 1:72 scale.
It completes a model with faithful underwing tanks together with the pylons they hang on. 3D printing captures the smooth surface and fine detail better than injection-molded parts. The type 1 variant differs from type 2 in the form of the pylon.
Wash the parts clean of any uncured print resin, separate them from the print supports and clean them up. Glue them with cyanoacrylate and sand with respiratory protection. Before gluing, check the position of the mountings on the wing of your kit.
This is an accessory, not a complete model. The base kit, glue and paints are not included in the package.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
