A set of sensors and antennas for the Su-25SM in 1:32 scale is a 3D printed accessory from Temp Models. It replaces the coarse external parts from the kit.
Responsibility details are not available.
The set brings 3D printed sensors, antennas and probes for the upgraded Su-25SM ground-attack aircraft in 1:32 scale from Temp Models. It is not a model of an aircraft but the small external parts that on a plastic model tend to be coarse or missing altogether. According to the name the set also covers the later SM3 upgrade step.
The external sensors and antennas are what gives away the scale of a finished model most of all. They include air pressure probes, angle-of-attack sensors, the antennas of the communication and navigation systems and the warning receivers. They are thin, often only a few millimeters thick, and in injection-molded plastic they therefore come out disproportionately heavy. Printed parts can render them at their real thickness, and that is exactly where the value of sets of this kind lies.
The parts are printed from resin and are held only by thin supports. Cut them off with a sharp scalpel as close to the part as possible, sand the marks down with fine sandpaper and protect your airways while sanding. It is glued with cyanoacrylate glue (super glue). Paint holds longer on a smooth print if you lay a thin coat of primer under it. Hold the small parts over a dish while cutting them off so that they do not get lost, and glue them on only after the surrounding area has been painted.
The set is an addition to building a model, not a model in its own right. It is supplied unassembled and unpainted, and glue, paints and the base kit are not included in the package, unless stated otherwise.
Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.
Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.
There are no questions here yet. Be the first to ask!
