Mr. Color - Opálený kov

A metallic shade of dark burnt steel from the Mr. Color lacquer range in a 10 ml bottle. It aims at exhaust tips, gun barrels and surfaces burnt by heat.

Manufacturer Gunze
Product EAN8591111586115

Responsibility details are not available.

3.20 €
2.64 € without VAT
In stock
Free shipping on orders over 1,000 czk in czech republic Personal pickup in Prostějov 14-day returns

About product

Dark steel with a trace of heat

Burnt metal is the tone that high temperature leaves on steel – dark, deep, with a warm brownish undertone. Modelers reach for it wherever a surface is meant to look heated or worn through to bare metal: exhaust tips, collector pipes, machine gun barrels, heat shields, the edges of steps and the loaded edges of hatches. It also works well on small fittings, hinges and springs, where an opaque black looks flat.

A lacquer binder, not an acrylic

The Mr. Color range is built on a solvent lacquer binder. It is thinned with thinners of the same brand – the ordinary one or the one with a leveling effect – and once dry it holds a very hard film that will take masking with tape, polishing and later sanding and weathering. It is exactly this durability that keeps the lacquer ranges in use even where water-thinnable paints otherwise prevail.

What to watch when spraying

Metallic pigment sinks to the bottom faster than the pigment of opaque shades. Stirring it up to the last settled remnant therefore decides whether the coat comes out even or blotchy. The recommended thinning ranges, according to the thickness, between ratios of 1:1 and 2:1 and it is applied with an airbrush, ideally in several light passes instead of one wet coat.

A smooth base suits metallic tones. On a matte and grainy surface the sparkle of the pigment scatters and the shade loses its metallic character, so it pays to unify the area beforehand with a glossier base. The manufacturer does not recommend brushing it on; anyone who still needs to should add about a quarter of the volume in retarder of the same brand, so as to level the strokes before the film skins over. The volume of the bottle is 10 ml.

Reviews

No reviews yet Have you built this one? Tell other modellers how it went and help them choose.

Forum

Naši poradci a znalci sortimentu jsou připraveni odpovídat na Vaše dotazy (Po–Pá, 8–18 hod).
Zeptejte se na co potřebujete, odpovíme co nejdříve.

Texts from customers in the advice section reflect solely the opinions and views of the customers. MNF trade s.r.o. does not approve or verify customer texts in advance.

There are no questions here yet. Be the first to ask!

FAQ

With the thinner for lacquer paints of the same brand, in the basic or the leveling version. Neither water nor a thinner for water-thinnable acrylics can be used.

The most common reason is pigment left unmixed at the bottom, or too matte a base. Longer stirring and a glossier base coat will help.

The manufacturer does not count on it with this range. It can be done with a quarter share of retarder, but the marks of the strokes tend to show more with metallic tones than with opaque paints.

Last seen

GunzeC061

Mr. Color - Opálený kov

A metallic shade of dark burnt steel from the Mr. Color lacquer range in a 10 ml bottle. It aims at exhaust tips, gun barrels and surfaces burnt by heat.
In stock
3.20 €
HaulerHLH720081:72

1:72 Soviet tank tools

The photo-etched set Soviet tank tools 1:72 from the Czech maker Hauler: a metal replacement for the plastic castings of tools and their mountings on the hulls of Soviet tanks.
In stock
5.96 €
GunzeC327

FS11136 Red - (Gloss)

Gloss red per the FS 11136 standard is a 10 ml lacquer paint. A rich red shade with a high gloss, used for warning and marking surfaces.
In stock
3.20 €
HaulerHLH720471:72

1:72 FT-17 (FTF model)

The Hauler 1:72 FT-17 photo-etched set is an aftermarket accessory in thin metal for a model of the French Renault FT tank. The set is etched to measure for the First to Fight kit.
In stock
9.16 €
AberABR72A221:72

1:72 Grilles For Pz.Kpfw.III And Stug.III

1:72 Grilles for the Pz.Kpfw.III and StuG III is a photo-etched set that on a small model replaces the solid cast grilles of the engine compartment with a part that really sees through.
In stock
3.16 €
30MF CLASS UP ARMOR (ROSAN PALADIN)-25 %Stock ClearanceFavorite
BandaiBAN67179

30MF CLASS UP ARMOR (ROSAN PALADIN)

Heavy armor of a paladin cut for the Rosan figure. Bulkier in shaping than the knightly variant of the same character.
Last one!
10.36 €7.76 € You save 2.60 €
1:24 Hyundai Santa Fe MX5 - Windows Mask Sheet / Logo Metal Sticker Set (for Academy Kits)-25 %Stock ClearanceFavorite
DEF ModelDD240041:24

1:24 Hyundai Santa Fe MX5 - Windows Mask Sheet / Logo Metal Sticker Set (for Academy Kits)

A set of window masks and metal logo stickers for a model of the fifth-generation Hyundai Santa Fe in 1:24 scale. Sharp window outlines without cutting tape by hand. Intended for the Academy kit.
3 leftof 4
9.16 €6.88 € You save 2.28 €
OPTION BODY PARTS TYPE (SPOTTER COSTUME) [COLOR B]-25 %Stock ClearanceFavorite
BandaiBAN67434

OPTION BODY PARTS TYPE (SPOTTER COSTUME) [COLOR B]

An interchangeable body set with a spotter's uniform as its theme, color variant B. Intended for figures.
Last one!
21.96 €16.48 € You save 5.48 €
Green Stuff WorldGSW0394

Haunted Tree Stumps

Haunted Tree Stumps is a set of scenic stumps and torsos of dried-out trees from Green Stuff World for dioramas, for figure bases and for game terrain.
In stock
11.16 €
Green Stuff WorldGSW0516

200x Resin Bullets and Shells

200x Resin Bullets and Shells is a set of two hundred resin bullets and cases from Green Stuff World for dioramas, figure bases and firing positions.
In stock
11.96 €
Loading, please wait...

Setting consent to personalization

With your consent, we may use the information below for the following purposes or share it with selected partners. You can adjust your settings for individual purposes (types of processing) and confirm your choice with the "Save settings" button:

Always active

Necessary cookies

These are technical files that are necessary for the correct behavior of our website and all its functions. They are used, among other things, to store products in the shopping cart, display products on request, control filters, personal settings and also set consent to the use of cookies. Your consent is not required for these cookies and it is not possible to remove it.

Analytical cookies

They count website traffic and, by collecting anonymous statistics, enable the operator to better understand their visitors and thus constantly improve the site.

Marketing cookies

They collect information to better tailor advertising to your interests, both on and off this website.

Setting consent to personalization

To make it easier for you to browse the site, to offer you customized content or advertising, and to analyze traffic anonymously, we use cookies that we share with our partners for social media, advertising, and analytics. You can adjust their settings with the "Edit settings" link and you can change it at any time in the footer of the website. You can find more detailed information in our Policy on the protection of personal data and the use of cookies.